BOMANN WA 7192 Bedienungsanleitung, Garantie Seite 33

The expected end of the program (start delay + pro-
gram duration) is shown on the display, the program
is ended after [x:xx] hours.
5 Degree of soiling
Press the button repeatedly to select one of three
intensity levels measured by the stain degree of the
laundry.
↪ Light → Normal →
Reduces or extends the washing time at the end of
the washing program by -20, -10 or +20 minutes.
6 Options
Button for selecting the options [Prewash] [Extra
Rinse] [Soak] [Rinse Stop] and [Eco].
The flashing symbol in the display indicates the se-
lection. After confirming the option, the correspond-
ing symbol lights up continuously.
Prewash
Additional wash cycle to the previously set main
wash program, for particularly dirty laundry.
Extra Rinse
Additional rinse cycle to the previously set main wash
program, detergent residues are rinsed out.
Soak
The laundry remains in the water for 30 or 60
minutes before the main wash phase, suitable for
particularly stubborn stains.
The soaking duration is shown on the display for
selection and final confirmation.
Rinse Stop
No draining or spinning after the last washing cycle.
The laundry remains in the water, which reduces the
formation of wrinkles. The draining and spinning pro-
cess is started by pressing the Start/Pause button.
Strong↩
Eco
The Eco option makes it possible to reduce energy
consumption while maintaining the same washing
performance → the program running time is extend-
ed.
7 Confirm option
Button to confirm the selected option.
8 Start/Pause
Press the button to start / pause the selected or run-
ning washing program.
After the start of the washing program, the remaining
time is shown in the display as [x:xx] hours and
minutes.
If the device is in pause mode, the control lamp of
the Start/Pause button and the symbol for the cur-
rently running program phase flashes on the display.
Safety child lock
To activate / deactivate the safety child lock, press
the button combination for about 3 seconds after
program start.
The symbol lights up when the safety child lock is
activated.
Other control indicators on display
No water supply
Door lock active
Program sequence:
Prewash cycle
Main wash cycle
Rinse cycle
Spin cycle
- The end of the washing program is indicated with
[End].
- Error codes are displayed in case of malfunction.
33