Klarstein 10028189 Anleitung Seite 17

7 Wind speed selection key
In cooling and air supply mode, press the key to select high,
medium or low wind speed operation.
In heating mode, press the key to select high, medium and low
wind speed operation. But limited by anti-cold conditions, under
certain conditions, it may not run according to the set wind speed.
In dehumidifi cation mode, pressing the key is invalid, and the fan
will forcibly choose low wind speed operation.
8 Timing Key
In the case of power on, press the key to close timing; in the case
of power off , press the key to open timing.
Press the key, when the timing symbol fl ashes, press up and down
key to select the required timing value.
Timing values can be set within 1-24 hours and the timing value is
adjusted upwards or downwards by one hour.
Operatomg Instructions of the Remote Control
POWER
MODE
UP
DOWN
FAN
TIMER
SWING:
°C<-->°F
17
Press the key to turn on or turn off
the machine.
press the key to switch between
cooling, air supply, dehumidifi cation
and heating (single cold with no such
function) mode.
Press the key to increase temperature
and timing set value.
Press the key to reduce temperature
and timing set value.
Press the key to select high, medium
and low wind speed output circularly.
Press the key to set timing value.
Press the key to open or close swing
style. Air fl ow of the air outlet can
blow at diff erent angles.
Press the key to switch between
Celsius and Fahrenheit.