Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
27. Lubrication
Every time the unit is cleaned, slightly oil the
saw belt with acid-free EFA special and grease
the guide with EFA grease.
28. Guide
Ensure particularly careful servicing of the
guide. Readjust in due time or immediately re-
place if worn out.
Check that the guide moves freely through the
spring and grease the guide.
29. Saw belt
Check saw belt regularly, replace if worn out.
30. Motor
Use a blunt, non-metal object to clean the con-
densation water outlets drilled into the bottom of
the motor. Larger amounts of condensation wa-
ter accumulating in the motor will provoke motor
failure (corroded winding) and high costs of re-
pair.
7.3 Extended maintenance (after
approx. 50 operating hours)
31. Splitting saw
Check and re-grease ball races of guide pulleys
as necessary.
32. Guide
Slightly grease both guides.
33. Torque wrench
At weekends, immerse the torque wrench in an
oil bath, do not relubricate.
34. Gearbox
The gearboxes are sealed for life. Lubrication
only needs to be replaced after repairs.
7.4 Repair by after-sales service
Disconnect the unit from the
works mains before starting
any repair work!
Repairs may only be carried out by authorised
specialists.
Our Service department is at your disposal
for all repair work. In the event of a repair,
Schmid & Wezel
please contact your nearest contract work-
shop or our parent company directly.
Please note that electric tools may only be
repaired by qualified electricians as incor-
rectly performed repairs can result in consid-
erable danger for the user.
On request, spare parts lists can be supplied
to the repair workshop with qualified special-
ist staff.
After every repair, the gear units must be re-
packed with grease!
8 Transport and Stor-
age
The unit must be stored in a dry, well-ventilated
room.
The unit must be cleaned as described in Chap-
ter 25 Periodically cleaning and transported in a
dry condition.
Ensure that the device is not damaged during
transport.
9 Collection of old
units
At the end of their useful service life, return old
units to the parent company for disposal
Seite / Page
28 / 33
Stand / Version
01 / 2020
Werbung
Inhaltsverzeichnis
