Explanation Of Operating Controls; Electrical Operation - Dometic 8 Serie Bedienungsanleitung

4.3 Explanation of operating
controls
Manual energy selection / manual ignition :
1 = Power On switch / Energy selector switch
2 = Flame indicator (galvanometer)
3 = Temperature controllerBattery igniter (gas)
4 = Piezo igniter or battery igniter (gas)
Explanations:
The refrigerator is equipped to operate on
mains power, 12V DC or liquid gas. Select the
desired power supply by turning the energy
selector switch (1) . The energy selector
switch (1) has four settings:
n
Off (2)
n
Mains voltage (230V AC) (3)
n
Direct-current voltage (Batterie, 12V DC)
(4)
n
Gas (liquid gas propane/butane) (5)
1
1
2
3
4
5
2

4.3.1 Electrical operation

1
Switch on the appliance by turning the energy
selection switch (1) clockwise to position :
230V operation,
CAUTION!
The refrigerator should only be used in
12VDC-operation while the vehicle's engi-
ne is running, otherwise the on-board-
battery would be discharged within a few
hours! .
230V operation: this option should only be
selected where the supply voltage of the
connection for power supply corresponds
to the value specified on the data plate.
Fig. 5
Any difference in
damage the appliance.
15
Refrigerator operation
3 4
1
Fig. 6
12V operation.
values may result in
Fig. 4
Fig. 7