Guarantee & Service - Philips GC9500 Serie Bedienungsanleitung

Problem Possible cause
The steam Water is pumped into the boiler inside the
generator produces steam generator. This is normal.
a pumping sound.
The steam There is not enough water in the water
generator does not tank.
produce any steam.
The steam generator is not hot enough to
produce steam.
You do not press the steam trigger.
The water tank is not placed properly in the
steam generator.
The appliance is not switched on.
The steam The auto-shut-off function is activated
generator has automatically when the steam generator has
switched off. not been used for more than 10 minutes.
All manuals and user guides at all-guides.com
Environment
- Do not throw away the appliance with the normal household waste
at the end of its life, but hand it in at an official collection point for
recycling. By doing this, you help to preserve the environment.
Guarantee & service
If you need service or information or if you have a problem, please visit
the Philips website at www.philips.com or contact the Philips Consumer
Care Centre in your country (you find its phone number in the worldwide
guarantee leaflet). If there is no Consumer Care Centre in your country,
go to your local Philips dealer.
troubleshooting
This chapter summarises the most common problems you could
encounter with the appliance. If you are unable to solve the problem with
the information below, contact the Consumer Care Centre in your country.
EnGlish
Solution
If the pumping sound continues
nonstop, switch off the steam
generator and remove the plug
from the wall socket. Contact an
authorised Philips service centre.
Fill the water tank.
Wait until the 'iron ready' light on
the iron lights up continuously.
Press the steam trigger and keep it
pressed while you steam iron.
Slide the water tank firmly back
into the steam generator ('click').
Insert the plug in the wall socket
and press the on/off button to
switch on the appliance.
Press the on/off button to switch
on the steam generator again.
13