Panasonic FZ-VEBG11AU Bedienungsanleitung Seite 7

3
Connect the computer to the Cradle.
A Insert the computer to the Cradle from above.
B Push the computer to the back.
CAUTION
Do not attempt to make connections if
there is any object between the computer
and the Cradle. Doing so could damage the
computer and the Cradle.
NOTE
See Reference Manual of the computer for connecting and setting USB devices,
external displays and LAN.
If the image of the external display connected to the cradle has stopped, remove the
computer from the cradle, and then reconnect it.
CAUTION
Push the computer into the back of the roller as
shown in the illustration (right) when connect-
ing it to the Cradle.
Do not attempt to move the Cradle while con-
necting the computer to the Cradle.
When connecting USB devices, HDMI compat-
ible display, headset or headphones to the com-
puter connected to the cradle, make sure that
the computer does not come off the cradle.
If the computer malfunctions while the Cradle is attached, disconnect the Cradle
( page 8) and check to see if the computer operates normally. If the computer
operates normally, the Cradle may be malfunctioning. Contact Panasonic Technical
Support.
E
7