Zelmer ZAF3550 Benutzerhandbuch Seite 10

PL EN
BEFORE ITS FIRST USE
1. Remove all packing materials and stickers from the inside and outside of the Air Fryer.
Gently wipe down exterior with a damp cloth or paper towel.
WARNING: Never immerse the Air Fryer or its plug in water or any other liquids.
2. Pull the basket handle to remove the basket from the Air Fryer. Use the tray handle, in the center of the
tray, to remove the tray. Use a sponge and warm, soapy water to wash the inside and outside of the basket
and tray. The basket and the tray are top-rack dishwasher safe.
3. WARNING: Do not use abrasive cleaning agents or scouring pads.
4. Dry thoroughly.
HOW TO USE
1. Connect the mains plug to an earthed wall socket.
2. Carefully pull the basket out of the Airfryer
3. Put the ingredients into the basket.
4. Slide the basket back to the Airfryer. Never use the basket without the food tray on it.
WARNING: Do not touch the basket during and sometime after use as it gets very hot. Only hold the basket
by the handle.
5. Press shortly the power standby button to turn on the air fryer.
Using the pre-set programmes:
With the air fryer switched on, press the menu button (M) to switch between the different programmes. Each
time you press the menu button (M), the mode is selected from left to right. Press the power button to select
the desired mode and start cooking. Each mode has an assigned time and temperature. To change these
you can press the +/- time and +/- temperature buttons before pressing the power button.
Manual Mode:
6. Press the temperature control touch button to the required temperature.
7. Press the timer touch button to the required preparation time, press shortly the power standby touch
button to start cooking, the working logo lights and rotates.
1) The fan indicator light (outside white lamp) lights and rotates;
2) The heat indicator light (center red lamp) lights when the temperature didn't reach the setting temperature
or the temperature come down;
3) The air fryer stops heating and the heat indicator light (centre red lamp) goes off when the temperature
reached the setting temperature.
4) The heat indicator light will go on and go off several times during frying.
8. Add 3 minutes to the preparation time when the appliance is cold, or you can also let the appliance
preheat without any ingredients inside approx. 4 minutes.
9. Some ingredients require shaking halfway through the preparation time. To shake or turn over the
ingredients, pull the basket out of the appliance by the handle and shake it or turn over the ingredients by
fork (or tongs). Then put the basket back into the Airfryer.
10. When you hear the timer bell, the set preparation time has elapsed. Pull the basket out of the appliance
and place it on a heat-resistant surface. Check if the ingredients are ready. If the ingredients are not ready
yet, simply slide the basket back into the appliance and set the timer to a few extra minutes.
11. To remove the ingredients, pull the basket out of the Airfryer. The basket and the ingredients are hot.
You can use a fork (or tongs) to take out the ingredients. To remove large or fragile ingredients, use a pair
of tongs to lift the ingredients out of the tank. Empty the basket into a bowl or onto a plate.
12. To program a delayed start, once the time and temperature have been set, press the delayed start
button (9) and select the desired time with the +/- time buttons. Press the power button to confirm. Delayed
start can be set from 0.5h to 24h.
10