Rear Panel - Cameo CLSTROBE1 Bedienungsanleitung

1
2
Connections, control, and functions of the CAMeO ClSTROBe1 and ClSTROBe2 stroboscopes are
identical.
1
POWeR INPUT
Permanently attached 1 m power cord with Schuko plug.
2
FUSe HOldeR
IMPORTANT INFORMATION: Always replace the fuse only with a fuse of the same type with the same rating
(information on the rear panel). If the fuse blows repeatedly, please contact an authorised service centre.
3
dMx INPUT
3-pole XLR socket for connection of a DMX controller (e.g., DMX mixer).
4
dMx OUTPUT
3-pole XLR socket for looping through the DMX control signal.
5
CONTROl BUTTONS
3 easily accessible control buttons permit system configuration.
6
led dISPlAY
Displays operating modes and additional system settings.
7
ANAlOG CONTROlleR INPUT/OUTPUT
The housings of both COB-LED stroboscopes have a permanently mounted safety catch mechanism.

ReAR PANeL

6
7
5
:
(cLstrobe1 showN)
3
4
7