Thermostat - Tefcold SSF150 Bedienungsanleitung

Thermostat Dixell
Display set temperature:
Press this key and the display will show the set temperature. Press the key again to return
to normal reading.
Set new temperature:
Press this key for 3 sec. and the display shows the set temperature.
Press this key to increase the set temperature.
Press this key to lower the set temperature.
Press this key to save the new settings. The display will flash with the new value and will
then return to normal reading.
Changing of parameters:
+
Press these keys continuously for 5 seconds to access the list of parameters.
Press this key to scroll up through the parameter-list.
Press this key to scroll down through the parameter-list.
Press this key to select the parameter to change, the display will show the actual value, use
the up/down keys to change the value and confirm with 'Set':
The display will return to normal reading after 15 sec.
See table of parameters from page 34.
10