Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Installation instructions
1.2. Foundation
The following foundation elements have proven themselves in practice:
• Slab foundation (base plate)
• Strip foundation
For both types, a foundation that is absolutely flat and load-bearing must be
ensured. This is the only way to ensure that the outdoor sauna can be assembled
without any difficulties and with precise accuracy.
We recommend using tar tape (moisture barrier) between the base wood and
the concrete to prevent moisture from penetrating the wood.
1.3. Anchoring the outdoor sauna
The outdoor sauna must be firmly anchored on the base plate or the strip
foundation. Strong winds can exert a powerful force on the outdoor sauna. To
prevent damage to your property or that of a third party, proper anchoring is
essential.
We would like to clarify that anchoring the outdoor sauna is the responsibility
of the customer and we do not accept any liability for accidental damage.
1.4. Tools required
● Hammer, wooden block and mallet
● Cordless screwdriver with bits for cross-head screws and Torx
● Roller tape measure
● Drill bits with a diameter of 4 mm, 5 mm, 6 mm, 20–30 mm (for the sauna
heater power cable)
● Spirit level
● Utility knife
● Ladder
● Saw
p. 4/14
Werbung
Inhaltsverzeichnis
