General Introduction; Key Features; Open Window Detection; Adaptive Start Technology - Sundirect Smart1.0 Bedienungsanleitung

All manuals and user guides at all-guides.com

1. General introduction

The Smart1.0 is specifically designed to work together with Sundirect
"Plus" range infrared panel heaters. Smart1.0 is a wireless thermostat
remote control. The receiver that pairs to Smart1.0 has already been pre-
assembled on the backside of the panel. One Smart1.0 can pair to more
than one "Plus" heater, i.e. multiple heaters within one room can be
controlled by the Smart1.0 thermostat.
The Smart1.0 will operate the "Plus" range infrared heaters by turning
them ON if the room temperature is lower than the desired room
temperature and will turn them OFF if the room temperature is reached.
Please read these instructions carefully and keep safe for future use.
Failure to comply with these instructions will void your warranty.

2. Key features

2.1 Open window detection

When the room temperature is above 14°C and our system detects a
dramatic temperature drop in a short time period, it will recognize that a
door/window was opened. To save energy Smart1.0 will power off and re-
start heating after one hour. If you closed the window/door or you would
like to start heating again you can manually turn on the heater again by
pressing the power button. You can activate/deactivate this function
by pressing "SET" and "+" buttons together for 3seconds.

2.2 Adaptive start technology

When in Smart mode, if the temperature is significantly lower 15 minutes
before the next PRG period than the set temperature in that period, the
system will self-learn to adjust and turn on the heater earlier if necessary.
This gives you a more comfortable temperature right from the start of the
next PRG period. You can activate/deactivate this function by
pressing "SET" and "-" buttons together for 3seconds.
3