Installation - Inner Door Reversal - Küppersbusch IKE 236-0 Gebrauchs- Und Montageanleitung

Remove the brackets and mark a distance of 8 mm
from the outer edge of the door where the nail must
be fitted (K).
Place the small square on the guide again and fix it
with the screws supplied.
Should the lining up of the furniture door be
necessary, use the clearance of slots.
At the end of operations, it is necessary to check if
the door of the furniture closes properly.
Fix cover (Hd) on guide (Hb) until it clips into place.
Inner door reversal
22
180°
8mm
K
Hb
PR168
Hb
Hd
PR167/1
Ha