Küppersbusch IKE 236-0 Gebrauchs- Und Montageanleitung Seite 21

Apply covers (C-D) on joint cover lugs and into hinge
holes.
Snap hinge covers(E) into position.
Separate parts Ha, Hb,Hc, Hd as shown in the
figure.
Place guide (Ha) on the inside part of the furniture
door, up and down as shown in the figure and mark
the position of external holes. After having drilled
holes, fix the guide with the screws supplied.
Fix cover (Hc) on guide (Ha) until it clips into place.
Open the appliance door and the furniture door at
90°. Insert the small square (Hb) into guide (Ha).
Put together the appliance door and the furniture
door and mark the holes as indicated in the figure.
C
D
E
E
Ha
Hb
Hc
Hd
PR266
ca. 50 mm
90°
90°
ca. 50 mm
Ha
Hc
PR33
8mm
Hb
PR167
Ha
21