Herunterladen Inhalt Inhalt Diese Seite drucken

Accessories And Spare Parts; Scope Of Delivery; Safety Devices; Symbols On The Device - Kärcher HT 650/36 Bp Bedienungsanleitung

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 1
Electrical and electronic appliances contain valu-
able, recyclable materials and often components
such as batteries, rechargeable batteries or oil,
which - if handled or disposed of incorrectly - can
pose a potential threat to human health and the environ-
ment. However, these components are required for the
correct operation of the appliance. Appliances marked
by this symbol are not allowed to be disposed of togeth-
er with the household rubbish.
Notes on the content materials (REACH)
Current information on content materials can be found
at: www.kaercher.com/REACH

Accessories and spare parts

Only use original accessories and original spare parts.
They ensure that the appliance will run fault-free and
safely.
Information on accessories and spare parts can be
found at www.kaercher.com.

Scope of delivery

The scope of delivery for the appliance is shown on the
packaging. Check the contents for completeness when
unpacking. If any accessories are missing or in the
event of any shipping damage, please notify your deal-
er.

Safety devices

CAUTION
Missing or modified safety devices
Safety devices are provided for your own protection.
Never modify or bypass safety devices.
Unlocking button
The trigger lockout button on the rear handle ensures
two-handed operation. The lockout button blocks the
trigger and thus prevents the hedge trimmer from start-
ing up in an uncontrolled manner.
Blade guard
The blade guard is an important component of the safe-
ty devices of the hedge trimmer. A damaged blade
guard must not be used and must be replaced immedi-
ately.

Symbols on the device

General warning symbol
Read the operating instructions and all
safety instructions before operating the
device for the first time.
Always wear suitable eye protection and
hearing protection when working with the
device.
Risk of injury. Do not touch the sharp cut-
ting tools.
Wear non-slip, sturdy gloves when work-
ing with the device.
14
Danger due to flung objects. Keep spec-
tators, especially children and pets, at
least 15 m away from the work area.
Do not subject the device to rain or moist
conditions.
Always hold the device with both hands.
The guaranteed sound pressure level
specified on the label is 98.

Protective clothing

DANGER
Risk of fatal injury from cut injuries. Wear suitable pro-
tective clothing when working with the device. Observe
the local regulations for accident prevention.
Wear suitable protective gloves with cutting protection
when working with the device.
Wear a suitable hard hat when working with the device.
Wear suitable hearing protection when working with the
device.
Wear suitable safety goggles or a helmet visor for pro-
tection against flying splinters.
Protective helmets with hearing protection and a safety
visor are available in specialist shops.

Description of the device

The maximum amount of equipment is described in
these operating instructions. Depending on the model
used, there are differences in the scope of delivery (see
packaging).
See graphics page for illustrations
Illustration A
Suspension eyelet
1
Blade
2
Hand guard
3
Handle, front
4
Screw for transmission grease filling hole
5
Type plate
6
Battery pack unlocking button
7
Unlocking switch for adjusting the cutting angle
8
Rear handle trigger
9
Front handle trigger
10
Handle, rear
11
Speed switch
12
Eyelet for hanging the carrying rack (optional)
13
English
Protective gloves
Head protection

Werbung

Inhaltsverzeichnis

Fehlerbehebung

loading

Inhaltsverzeichnis