Precautions In The Case Of Storing And/Or Freezing; Precautions Againt Freezing, And Instructions For Storage; Maintenance; Inlet Filter - Interpump Group GREEN JET GX22 Bedienungsanleitung

9 - PRECAUTIONS IN THE CASE OF STORING AND/OR FREEZING

If the unit is to be stored in a place where there is
risk of freezing, or it is to remain unused for more
than three months, we recommend placing some
antifreeze solution into the pump, (a normal anti-
freeze as used in your vehicle is sufficient). If in
doubt, at freezing temperatures or after any long
storage time, we suggest you turn the motor with
the key provided before starting, to release any
possibilities of block-ages from freezing or a build
up of lime scale deposits.
Taking these precautions before starting, will avoid
damage to the unit.
Remember to remove the key from the motor
before switching on the machine.
• Maintenance and repairs should always be performed by trained and authorised personnel.
• Before carrying out any cleaning, maintenance and/or parts replacement, disconnect the
machine from the power mains, removing the plug from the power outlet.
• Proper maintenance favours a longer duration of operation and improved performance.
• Periodically check the conditions of the washer, pressurised parts (pipe, fittings, lance) and
the electrical cable (see "General warnings for use").
Check for any water or oil leaks and/or malfunctions.
If necessary, replace affected parts.
The list of specific machine components and circuit diagrams are contained in this booklet.
Contact Interpump Group customer service in the event of any doubts.

10.1 - INLET FILTER

10 - MAINTENANCE

Before using the machine, be sure that the filter is
clean wash carefully with clean running water, and/or
clean with air gun until all deposits have heen removed.
Remenber that a clean filter guarantees the good func-
tioning of the machine.
Clean the filter using an air
pressure gun.
17
Clean the filter under run-
ning water.