auna KR-190 Bedienungsanleitung Seite 24

Playback Setup
Device
Equalizer
Resume When
PWR ON
Software Update
Reset
You may change the defautl DLNA name as you like. The information below is the introduction of how to
setup up media streaming from PC or other media server. Study the own instruction of the software or apps
you use to enjoy music streaming if necessary. Make sure the music files are in the format of MP3, WMA, or
WAV for music streaming to the radio.
UPnP
• Connect the PC to the network.
• Ensure the Radio is powered on and connected to the same network.
• Open the UPnP platform Windows Media Player (11 or later). Alternatively, other platforms or server
such as Windows Media Connection may be used.
• Allow to share your media to Radio.
• Add the audio files and folders you want to share with radio to the media library.
You may also enjoy the streaming music from other music server, such as smart phone (Android platform):
• Connect the mobile to the network
• Search and install media sharing apps from Google Play.
• Add the audio files from your mobile you want to share.
• After setup the shared server, choose the music and control playback on the Radio.
24
Select the playback mode of media center – Off (no repeat or shuffle), Repeat all,
Repeat one, or Shuffle.
Default device name for DLNA is KR-190. You may rename it for DLNA setup
on the PC or mobile.
Default equalizer is Normal, you may change to Flat, Jazz, Rock, Movie, Classical,
Pop, or News. Press EQ on the remote control to swap among the EQ mode for
shortcut.
The system is default to resume internet radio playback if you were listening to
internet radio or media center before switch off the unit. If turn this setting off, the
system will remain in the main menu when switching on the unit.
Update software. If there is an updated software version on the server, the system
will notify you when you return to the main menu.
Restore the default settings. After the KR-190 is reset, the system will move to lan-
guage setting menu. And it will automatically turn to network setting menu once
the OSD language is elected.
DLNA / UPnP