Controls And Indicators - Audiovox VME 9312 TS Bedienungsanleitung

CONTROLS AND INDICATORS

Button Operation
1. OPEN/CLOSE
Press to activate the automatic mechanical system and move the TFT monitor into viewing position. Press again to
close the TFT.
2. WIDE/NAV/DISP
Press to adjust the display aspect of the picture to one of two settings: Full or Normal. Long Press switch directly to the
Navigation Mode if the NAV 1352 TS or NAV 101 is connected .Another long press switch back to the previous source.
With the monitor closed, press the DISP button to cycle through information available on the LCD screen.
3. PICTURE/AS/PS
Press to adjust the Brightness and Contrast. Press the AUDIO button (5) to move between Brightness to Contrast.
Turn the rotary encoder (5) to adjust the setting for the selected option. With the monitor closed, press AS/PS to auto-
matically store strong radio stations in the six preset channels in the current band.
4. TILT/BAND
Press to activate the tilt function. Use the joystick to make adjustments while the red tilt icon is flashing. Press once to
adjust the downward tilt angle of the screen one step at a time or press and hold to adjust the angle in a continuous
motion. With the monitor closed, press the BAND button to change the AM or FM band.
5. AUDIO/LO/DX
Rotate to adjust the volume. Press and release to enter and/ or confirm audio settings. Press and hold to activate the
Local (LOC) setting.
6. SRC
Press to select playing mode. Long press switch the unit ON/OFF.
7. LCD Display
8. MUTE
Press to silence the receiver. Press again to resume previous volume level.
NOTE: The VME 9312 TS features Softmute, which will allow the volume to increase or decrease gradually when the
MUTE function is activated or deactivated.
54