Lighting Control - La Sommeliere MILLESIME160 Gebrauchsanweisung

9
Button for changing the temperature unit of measurement between Degree Celsius
indicated by the symbol "° C" and Fahrenheit indicated by the symbol "F". Press the
button for 3 seconds to switch from one unit of measurement to another.
10
Press this button for 3 seconds to turn the cellar on or off without unplugging it.
When you plug the device into a power outlet, it automatically displays the set temperature.
To display the actual temperature, simultaneously press the temperature adjustment buttons
(7) and (8). The actual temperature is displayed. After 10 seconds the cellar returns to the
initial mode and automatically indicates the programmed temperature.

LIGHTING CONTROL

Press the button (9) to adjust the lighting.
Press (9), when "L1" is displayed, the automatic switching off of the LED lighting is
deactivated.
Press (9), when "L2" is displayed, the automatic switching off of the LED lighting is
activated. The LEDF lighting will turn off after 10 minutes.
VACATION MODE
Vacation mode is available for observing certain religious holidays. This mode turns off the
displays, interior lighting and audible alarms and prevents them from turning back on.
Normal cooling operations will still take place.
To start holiday mode, press the power (10) and light (4) buttons simultaneously for at least
3 seconds. The indicator light will flash four times and confirm that vacation mode is
activated. Vacation mode can be stopped by repeating the above process.
Vacation mode will automatically end after 96 hours.
ECO-DEMO MODE
The eco demo mode can be activated by presenting the device at exhibitions, trade fairs or
in sales rooms. In eco demo mode, the compressor and all fan motors are off.
By pressing and holding at the same time for at least three seconds (4), (7) and (8), the
indicator light will flash five times to confirm the entry and the device will operate in
eco-demo mode. The demo-eco mode can be abandoned by repeating the above process,
note that the compressor and fan will activate 5 seconds later (for compressor protection
reasons).
30