Herunterladen Inhalt Inhalt Diese Seite drucken

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 66
Copyright Notice:
Copyright Notice:
Copyright Notice:
Copyright Notice:
Copyright Notice:
No part of this installation guide may be reproduced, transcribed, transmitted, or trans-
lated in any language, in any form or by any means, except duplication of documen-
tation by the purchaser for backup purpose, without written consent of ASRock Inc.
Products and corporate names appearing in this guide may or may not be registered
trademarks or copyrights of their respective companies, and are used only for identifica-
tion or explanation and to the owners' benefit, without intent to infringe.
Disclaimer:
Disclaimer:
Disclaimer:
Disclaimer:
Disclaimer:
Specifications and information contained in this guide are furnished for informational
use only and subject to change without notice, and should not be constructed as a
commitment by ASRock. ASRock assumes no responsibility for any errors or omissions
that may appear in this guide.
With respect to the contents of this guide, ASRock does not provide warranty of any kind,
either expressed or implied, including but not limited to the implied warranties or
conditions of merchantability or fitness for a particular purpose. In no event shall
ASRock, its directors, officers, employees, or agents be liable for any indirect, special,
incidental, or consequential damages (including damages for loss of profits, loss of
business, loss of data, interruption of business and the like), even if ASRock has been
advised of the possibility of such damages arising from any defect or error in the guide
or product.
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation.
CALIFORNIA, USA ONLY
The Lithium battery adopted on this motherboard contains Perchlorate, a toxic
substance controlled in Perchlorate Best Management Practices (BMP) regulations
passed by the California Legislature. When you discard the Lithium battery in
California, USA, please follow the related regulations in advance.
"Perchlorate Material-special handling may apply, see
www.dtsc.ca.gov/hazardouswaste/perchlorate"
ASRock Website: http://www.asrock.com
Copyright©2007 ASRock INC. All rights reserved.
ASRock 775XFire-VSTA Motherboard
Published January 2007
1 1 1 1 1

Werbung

Inhaltsverzeichnis
loading

Inhaltszusammenfassung für ASROCK 775XFire-VSTA

  • Seite 1 ASRock. ASRock assumes no responsibility for any errors or omissions that may appear in this guide. With respect to the contents of this guide, ASRock does not provide warranty of any kind, either expressed or implied, including but not limited to the implied warranties or conditions of merchantability or fitness for a particular purpose.
  • Seite 2: Inhaltsverzeichnis

    Serial ATA Connector 3 (SATA_3, black) PCI Express x1 Slot (PCIE2) Serial ATA Connector 1 (SATA_1, blue) PCI Express x16 Slot (PCIE1) Serial ATA Connector 0 (SATA_0, blue) SLI / XFIRE Power Connector Chassis Fan Connector (CHA_FAN1) 2 2 2 2 2 ASRock 775XFire-VSTA Motherboard...
  • Seite 3 “ok”. Choose “2CH”, “4CH”, “6CH”, or “8CH” and then you are allowed to select “Realtek HDA Primary output” to use Rear Speaker, Central/Bass, and Front Speaker, or select “Realtek HDA Audio 2nd output” to use front panel audio. 3 3 3 3 3 ASRock 775XFire-VSTA Motherboard...
  • Seite 4: Package Contents

    In case any modifications of this manual occur, the updated version will be available on ASRock website without further notice. You may find the latest VGA cards and CPU support lists on ASRock website as well. ASRock website http://www.asrock.com 1.1 Package Contents...
  • Seite 5 - 4 x DDRII DIMM slots - Support DDRII533 - Max. capacity: 4GB (see CAUTION 3) Hybrid Booster - CPU Frequency Stepless Control (see CAUTION 4) - ASRock U-COP (see CAUTION 5) - Boot Failure Guard (B.F.G.) Expansion Slot - Supports ATI CrossFire...
  • Seite 6 - Chassis Fan Tachometer - CPU Quiet Fan - Voltage Monitoring: +12V, +5V, +3.3V, Vcore ® ® - Microsoft Windows 2000/XP/XP 64-bit/Vista Vista 64-bit compliant (see CAUTION 9) Certifications - FCC, CE, WHQL 6 6 6 6 6 ASRock 775XFire-VSTA Motherboard...
  • Seite 7 ® ® Please visit our website for Microsoft Windows Vista / Vista 64-bit driver and related information. ASRock website http://www.asrock.com 7 7 7 7 7 ASRock 775XFire-VSTA Motherboard...
  • Seite 8 Premium and Basic logo, please follow the below table for minimum hardware requirement. Celeron D 326 Memory 512MB Single Channel DX9.0 with WDDM Driver with 128bit VGA memory (Premium) with 64bit VGA memory (Basic) 8 8 8 8 8 ASRock 775XFire-VSTA Motherboard...
  • Seite 9 RADEON X1300 PRO MSI RX1600GPRO-TD256E X1600PRO For the latest updates of the supported PCI Express VGA card list for AGI Express slot (PCI Express x4), please visit our website for details. ASRock website: http://www.asrock.com/support/index.htm 9 9 9 9 9 ASRock 775XFire-VSTA Motherboard...
  • Seite 10 CPU surface is unclean or if there is any bent pin on the socket. Do not force to insert the CPU into the socket if above situation is found. Otherwise, the CPU will be seriously damaged. ASRock 775XFire-VSTA Motherboard...
  • Seite 11 Use your left hand index finger and thumb to support the load plate edge, engage PnP cap with right hand thumb and peel the cap from the socket while pressing on center of PnP cap to assist in removal. ASRock 775XFire-VSTA Motherboard...
  • Seite 12 Step 5. Connect fan header with the CPU fan connector on the motherboard. Step 6. Secure excess cable with tie-wrap to ensure cable does not interfere with fan operation or contact other components. ASRock 775XFire-VSTA Motherboard...
  • Seite 13 2.3 Installation of Memory Modules (DIMM) 2.3 Installation of Memory Modules (DIMM) 775XFire-VSTA motherboard provides four 240-pin DDRII (Double Data Rate II) DIMM slots, and supports Dual Channel Memory Technology. For dual channel configuration, you always need to install identical (the same brand, speed, size and chip-type) DDRII DIMM pair in the slots of the same color.
  • Seite 14: Installing A Dimm

    DIMM if you force the DIMM into the slot at incorrect orientation. Step 3. Firmly insert the DIMM into the slot until the retaining clips at both ends fully snap back in place and the DIMM is properly seated. ASRock 775XFire-VSTA Motherboard...
  • Seite 15: Installing An Expansion Card

    Express slot (PCI Express x4) will be enabled. In other words, you are able to adjust the jumpers to enjoy the benefit of Dual Graphics feature. Please refer to the table below for the correct jumper settings. ASRock 775XFire-VSTA Motherboard...
  • Seite 16 Radeon X1900 Series Radeon X1900 CrossFire Edition Radeon X1800 Series Radeon X1800 CrossFire Edition Radeon X1650Pro Series Radeon X1650Pro Series Radeon X1600 Series Radeon X1600 Series Radeon X1300 Series Radeon X1300 Series Radeon X850 Series Radeon X850 CrossFire Edition ASRock 775XFire-VSTA Motherboard...
  • Seite 17 X850XT, X1900 and X1950 series. Step 3. Install the standard Radeon (CrossFire Ready) graphics card to AGI Ex- press slot (PCI Express x4). For the proper installation procedures, please refer to section “Expansion Slots”. Standard Radeon (CrossFire Ready) graphics card ASRock 775XFire-VSTA Motherboard...
  • Seite 18: Dvi Connector

    Radeon (CrossFire Ready) cable to DVI connector of graphics card. Please connect the DVI-DMS the compatible standard cable to the correct DVI connector; otherwise Radeon (CrossFire , the graphics card will not work. Ready) graphics card. ASRock 775XFire-VSTA Motherboard...
  • Seite 19 XP Service Pack 2 or higher installed in your system, there is no need to download it again): http://www.microsoft.com/windowsxp/sp2/default.mspx B. You must have Microsoft .NET Framework installed prior to downloading and installing the CATALYST Control Center: http://www.microsoft.com/downloads/details.aspx? FamilyId=262D25E3-F589-4842-8157-034D1E7CF3A3&displaylang=en Step 9. Restart your computer. ASRock 775XFire-VSTA Motherboard...
  • Seite 20 Step 12. You can freely enjoy the benefit of CrossFire feature. * CrossFire appearing here is a registered trademark of ATI Technologies Inc., and is used only for identification or explanation and to the owners’ benefit, without intent to infringe. ASRock 775XFire-VSTA Motherboard...
  • Seite 21: Ps2_Usb_Pwr1 Jumper

    To clear and reset the system parameters to default setup, please turn off the computer and unplug the power cord from the power supply. After waiting for 15 seconds, use a jumper cap to short 2 pins on CLRCMOS1 for 5 seconds. ASRock 775XFire-VSTA Motherboard...
  • Seite 22 (SATA_3: see p.2, No. 13) 1.5 Gb/s data transfer rate. Serial ATA (SATA) Either end of the SATA data cable Data Cable can be connected to the SATA hard disk or the SATA connector (Optional) on the motherboard. ASRock 775XFire-VSTA Motherboard...
  • Seite 23 CD-ROM, DVD-ROM, TV tuner card, or MPEG card. Front Panel Audio Header This is an interface for front panel audio cable that allows (9-pin HD_AUDIO1) convenient connection and (see p.2 No. 24) control of audio devices. ASRock 775XFire-VSTA Motherboard...
  • Seite 24: Cpu Fan Connector (Cpu_Fan1)

    CPU fan still can work successfully even without the fan speed control function. If you plan to connect the 3-Pin CPU fan to the CPU fan connector on this motherboard, please connect it to Pin 1-3. Pin 1-3 Connected 3-Pin Fan Installation ASRock 775XFire-VSTA Motherboard...
  • Seite 25: Game Port Header (Game1)

    HDMI_SPDIF cable to the (Optional) HDMI_SPDIF header on the motherboard. Then connect the white end (B or C) of HDMI_SPDIF cable to the HDMI_SPDIF connector of HDMI VGA card. A. black end B. white end (2-pin) C. white end (3-pin) ASRock 775XFire-VSTA Motherboard...
  • Seite 26: Hdmi_Spdif Header (Hdmi_Spdif1)

    Connect the HDMI output connector on HDMI VGA card to HDMI device, such as HDTV. Please refer to the user manual of HDTV and HDMI VGA card vendor for detailed connection procedures. Step 5. Install HDMI VGA card driver to your system. ASRock 775XFire-VSTA Motherboard...
  • Seite 27 2.12 Hot Plug and Hot Swap F 2.12 Hot Plug and Hot Swap F unctions for SA A HDDs 775XFire-VSTA motherboard supports Hot Plug and Hot Swap functions for SATA Devices. NOTE What is Hot Plug Function? If the SATA HDDs are NOT set for RAID configuration, it is called “Hot Plug”...
  • Seite 28 Support CD for proper configuration. Please refer to the document in the Support CD, “Guide to SATA Hard Disks Installation and RAID Configuration”, which is located in the folder at the following path: .. \ RAID Installation Guide ASRock 775XFire-VSTA Motherboard...
  • Seite 29 “Intel(R) 82801FR SATA RAID Controller (Desktop ICH6R-Windows ® XP/2000)” for Windows XP/2000 or “Intel(R) 82801FR SATA RAID Controller ® (Desktop ICH6R-Windows XP64)” for Windows XP 64-bit. 5. Finish the Windows ® installation and install all necessary drivers. ASRock 775XFire-VSTA Motherboard...
  • Seite 30 Disk Management from within Windows ® in order to partition and format the empty space created when the two hard drive capacities are combined. You may also use third-party software to extend any existing partitions within the RAID volume. ASRock 775XFire-VSTA Motherboard...
  • Seite 31: Installing Windows

    / Vista 64-bit OS on your system. When you see “Where do you want to install Windows?” page, please insert the ASRock Support CD into your optical drive, and click the “Load ® ® Driver” button on the left on the bottom to load the Intel RAID drivers.
  • Seite 32 Advanced screen IDE Configuration. Set “ATA/IDE Configuration” to [Enhanced], and then in the option “Configure SATA as”, please set the option to [IDE]. STEP 2: Install Windows ® 2000 / XP / XP 64-bit OS on your system. ASRock 775XFire-VSTA Motherboard...
  • Seite 33 “Configure SATA as”, please set the option to [IDE]. STEP 2: Install Windows ® Vista / Vista 64-bit OS on your system. ® After setting up BIOS, you can start to install Windows Vista / Vista 64-bit on your system. ASRock 775XFire-VSTA Motherboard...
  • Seite 34 This motherboard is equipped with Intel LGA 775 socket, which is a new CPU socket interface that Intel has released. Since it has several tiny pins, whcih are easily to be damaged by improper handling, ASRock sincerely presents you a clear installation guide through this “LGA 775 CPU Installation Live Demo”.
  • Seite 35 ASRock 775XFire-VSTA Motherboard...
  • Seite 36 ® ® ® ® ® ® ASRock 775XFire-VSTA Motherboard...
  • Seite 37 ® ® ASRock 775XFire-VSTA Motherboard...
  • Seite 38 ® ® ® ® ® ® ® ® ® ® ASRock 775XFire-VSTA Motherboard...
  • Seite 39 ® ® ASRock 775XFire-VSTA Motherboard...
  • Seite 40 ASRock 775XFire-VSTA Motherboard...
  • Seite 41 ASRock 775XFire-VSTA Motherboard...
  • Seite 42 ASRock 775XFire-VSTA Motherboard...
  • Seite 43 DDRII_1 DDRII_2 DDRII_3 DDRII_4 ASRock 775XFire-VSTA Motherboard...
  • Seite 44 ASRock 775XFire-VSTA Motherboard...
  • Seite 45 “ ” ASRock 775XFire-VSTA Motherboard...
  • Seite 46 ® ® ASRock 775XFire-VSTA Motherboard...
  • Seite 47 ASRock 775XFire-VSTA Motherboard...
  • Seite 48 ASRock 775XFire-VSTA Motherboard...
  • Seite 49 ® ® ASRock 775XFire-VSTA Motherboard...
  • Seite 50 ASRock 775XFire-VSTA Motherboard...
  • Seite 51 ASRock 775XFire-VSTA Motherboard...
  • Seite 52 ASRock 775XFire-VSTA Motherboard...
  • Seite 53 ASRock 775XFire-VSTA Motherboard...
  • Seite 54 SLI/XFIRE_POWER1 ASRock 775XFire-VSTA Motherboard...
  • Seite 55 ASRock 775XFire-VSTA Motherboard...
  • Seite 56 ASRock 775XFire-VSTA Motherboard...
  • Seite 57 ® ASRock 775XFire-VSTA Motherboard...
  • Seite 58 ® ® ® ® ® ® ® ® ® ® ® ASRock 775XFire-VSTA Motherboard...
  • Seite 59 ® ® ® ® ® ® ® ® ® ® ® ® ® ASRock 775XFire-VSTA Motherboard...
  • Seite 60 ® ® ® ® ® ® ASRock 775XFire-VSTA Motherboard...
  • Seite 61 ® ® ® ® ® ® ® ® ® ® ® ® ® ® ® ® ® ® ® ® ® ASRock 775XFire-VSTA Motherboard...
  • Seite 62 ® ® ® ® ® ® ® ® ® ® ASRock 775XFire-VSTA Motherboard...
  • Seite 63 ® ® ASRock 775XFire-VSTA Motherboard...
  • Seite 64 ® ® “LGA 775 CPU Installation Live Demo” ..\ Live Demo \ LGA 775 CPU Installation \ LGA775INST_SChinese.DAT ASRock 775XFire-VSTA Motherboard...
  • Seite 65 ASRock 775XFire-VSTA Motherboard...
  • Seite 66: Einführung

    1. Einführung 1. Einführung 1. Einführung Wir danken Ihnen für den Kauf des ASRock 775XFire-VSTA Motherboard, ein zuverlässiges Produkt, welches unter den ständigen, strengen Qualitätskontrollen von ASRock gefertigt wurde. Es bietet Ihnen exzellente Leistung und robustes Design, gemäß der Verpflichtung von ASRock zu Qualität und Halbarkeit.
  • Seite 67: Spezifikationen

    - 4 x Steckplätze für DDRII - Unterstützt DDRII533 - Max. 4GB (siehe VORSICHT 3) Hybrid Booster - Schrittloser CPU-Frequenz-Kontrolle (siehe VORSICHT 4) - ASRock U-COP (siehe VORSICHT 5) - Boot Failure Guard (B.F.G. – Systemstartfehlerschutz) Erweiterungs- - Unterstützt ATI CrossFire steckplätze...
  • Seite 68 - Drehzahlmessung für Gehäuselüfter - CPU-Lüftergeräuschdämpfung - Spannungsüberwachung: +12V, +5V, +3.3V, Vcore Betriebssysteme - Unterstützt Microsoft ® Windows ® 2000 / XP / XP 64-Bit / Vista / Vista 64-Bit (siehe VORSICHT 9) Zertifizierungen - FCC, CE, WHQL ASRock 775XFire-VSTA Motherboard...
  • Seite 69 64-Bit Treiber wird ständig aktualisiert. Sobald wir den neuesten Treiber haben, stellen wir ihn auf unserer Website zur Verfügung. Bitte besuchen Sie unsere Website für ® ® den Microsoft Windows Vista / Vista 64-Bit Treiber und verwandte Informationen. ASRock-Website http://www.asrock.com ASRock 775XFire-VSTA Motherboard...
  • Seite 70: Minimale Hardwarevorausetzungen Für Windows

    Rechner auf die Vergabe des Windows Vista Premium und Basic- Logos vorbereiten möchten, finden die minimalen Hardwarevoraussetzungen in der folgenden Tabelle. Celeron D 326 Speicher 512 MB, Single Channel DX9.0 mit WDDM-Treiber mit 128 Bit-VGA-Speicher (Premium) mit 64 Bit-VGA-Speicher (Basic) ASRock 775XFire-VSTA Motherboard...
  • Seite 71: Sicherheitshinweise Vor Der Montage

    Bevor Sie die 775-Pin CPU in den Sockel sitzen, prüfen Sie bitte, ob die CPU-Oberfläche sauber ist und keine der Kontakte verbogen sind. Setzen Sie die CPU nicht mit Gewalt in den Sockel, dies kann die CPU schwer beschädigen. ASRock 775XFire-VSTA Motherboard...
  • Seite 72 775-Pin Sockel 775-Pin CPU Um die CPU ordnungsgemäß einsetzen zu können, richten Sie die zwei Orientierungskerben der CPU mit den beiden Markierungen des Sockels aus. Schritt 2-3. Drücken Sie die CPU vorsichtig in vertikaler Richtung in den Sockel. ASRock 775XFire-VSTA Motherboard...
  • Seite 73 Schritt 4. Sockel schließen: Schritt 4-1. Drehen Sie die Ladeplatte auf den Kühlkörper (IHS). Schritt 4-2. Drücken Sie leicht auf die Ladeplatte und schließen Sie den Ladehebel. Schritt 4-3. Sichern Sie Ladehebel und Ladeplatte mithilfe des Hebelverschlusses. ASRock 775XFire-VSTA Motherboard...
  • Seite 74 Uhrzeigersinn zu drehen, wird der Kühlkörper nicht ordnungsgemäß am Motherboard befestigt. Schritt 5. Schließen Sie den Lüfter an den CPU- Lüfteranschluss des Motherboards. Schritt 6. Befestigen Sie überschüssiges Kabel mit Band, um eine Störung des Lüfters oder Kontakt mit anderen Teilen zu vermeiden. ASRock 775XFire-VSTA Motherboard...
  • Seite 75: Installation Der Speichermodule (Dimm)

    2.3 Installation der Speichermodule (DIMM) 2.3 Installation der Speichermodule (DIMM) 2.3 Installation der Speichermodule (DIMM) Die Motherboards 775XFire-VSTA bieten vier 240-pol. DDRII (Double Data Rate II) DIMM-Steckplätze und unterstützen die Dual-Kanal-Speichertechnologie. Für die Dual-Kanalkonfiguration dürfen Sie nur identische (gleiche Marke, Geschwindigkeit, Größe und gleicher Chiptyp) DDRII DIMM-Paare in den...
  • Seite 76: Einsetzen Eines Dimm-Moduls

    Steckplätze zu zwingen, führt dies zu dauerhaften Schäden am Mainboard und am DIMM-Modul. Schritt 3: Drücken Sie die DIMM-Module fest in die Steckplätze, so dass die Halteklammern an beiden Enden des Moduls einschnappen und das DIMM-Modul fest an Ort und Stelle sitzt. ASRock 775XFire-VSTA Motherboard...
  • Seite 77: Erweiterungssteckplätze: (Pci- , Pci Express-Und Agi Express-Slots)

    Express-Slots): Express-Slots): Es stehen 3 PCI- , 2 PCI Express - und 1 AGI Express -Slot (PCI Express x4) auf dem 775XFire-VSTA Motherboard zur Verfügung. PCI-Slots: PCI-Slots werden zur Installation von Erweiterungskarten mit dem 32bit PCI-Interface genutzt. PCI Express-Slots: PCIE1 (PCIE x16-Steckplatz) wird für PCI Express- Grafikkarten mit x16-Busbreite verwendet.
  • Seite 78: Dual Graphics-Funktion

    Applikationen. Zur Zeit wird die CrossFire -Funktion nur von Windows ® XP mit Service Pack 2 unterstützt. Könnte in Zukunft von einem anderen Betriebssystem, ® z.B. Windows Vista unterstützt werden. Informieren Sie sich auf der ATI Website nach Treiber-Updates. ASRock 775XFire-VSTA Motherboard...
  • Seite 79: Pciex1_En1

    Stellen Sie die Jumper am Motherboard ein, um den AGI Express- Steckplatz (PCI Express x4) zu aktivieren. Schauen Sie sich die Bilder unten an, um die Jumper richtig einzustellen. PCIEx1_EN5: Pol1 und Pol2 PCIEx1_EN1-4: Pol1 und kurzschließen Pol2 kurzschließen ASRock 775XFire-VSTA Motherboard...
  • Seite 80 Verbinden Sie auch das Monitorkabel mit der Grafikkarte im PCIE1- Steckplatz. Schritt 5. Verbinden Sie das DVI-DMS-Kabel mit den zwei installierten Grafikkarten und dem Anschluss am Monitor. (Wenn Sie zwei Radeon-Standardgrafikkarten (CrossFire Ready) in diesem Motherboard installieren, überspringen Sie bitte diesen Schritt.) ASRock 775XFire-VSTA Motherboard...
  • Seite 81: Dvi-Anschluss

    Edition Grafikkarte und das andere Ende mit dem Anschluss an der Radeon (CrossFire Ready) Grafikkarte. Schritt 6. Schalten Sie den Computer ein und fahren das Betriebssystem hoch. Schritt 7. Entfernen Sie jeden früher installierten ATI -VGA-Treiber von Ihrem System. ASRock 775XFire-VSTA Motherboard...
  • Seite 82 Schritt 11. Klicken Sie doppelt auf “ATI Catalyst Control Center”. Klicken Sie auf “View” (Ansicht) und wählen dann “Advanced View” (Erweiterte Ansicht). Klicken Sie auf “CrossFire ” und haken dann die Option “Enable CrossFire ” (CrossFire aktivieren) an. ASRock 775XFire-VSTA Motherboard...
  • Seite 83 Schritt 12. Jetzt können Sie den Nutzen aus der CrossFire -Funktion ziehen. * CrossFire ist ein eingetragenes Warenzeichen der ATI Technologies Inc. und wird nur zur Identifizierung oder Erläuterung und zu Gunsten des Inhabers, ohne Rechtverletzungsabsicht, verwendet. ASRock 775XFire-VSTA Motherboard...
  • Seite 84: Einstellung Der Jumper

    System-Passwort, Datum, Zeit und die verschiedenen BIOS-Parameter. Um die Systemparameter zu löschen und auf die Werkseinstellung zurückzusetzen, schalten Sie bitte den Computer ab und entfernen das Stromkabel. Benutzen Sie eine Jumperkappe, um die Pins an CLRCMOS1 für 3 Sekunden kurzzuschließen. ASRock 775XFire-VSTA Motherboard...
  • Seite 85: Integrierte Header Und Anschlüsse

    (SATA_2: siehe S.2 - No. 12) aktuelle SATA-Schnittstelle (SATA_3: siehe S.2 - No. 13) ermöglicht eine Datenübertragungsrate bis 1,5 Gb/s. Serial ATA- (SATA-) Sie können beide Enden des Datenkabel SATA-Datenkabels entweder mit der SATA-Festplatte oder dem (Option) SATA-Anschluss am Mainboard verbinden. ASRock 775XFire-VSTA Motherboard...
  • Seite 86 Sende- (5-pin IR1) und Empfangs-Infrarotmodul. (siehe S.2 - No. 19) Interne Audio-Anschlüsse Diese ermöglichen Ihnen Stereo-Signalquellen, wie z. B. (4-Pin CD1) CD-ROM, DVD-ROM, TV-Tuner (CD1: siehe S.2 - No. 26) oder MPEG-Karten mit Ihrem System zu verbinden. ASRock 775XFire-VSTA Motherboard...
  • Seite 87 Schließen Sie den Gehäuselautsprecher an (4-pin SPEAKER1) diesen Header an. (siehe S.2 - No. 18) Gehäuselüfteranschluss Verbinden Sie das Gehäuselüfterkabel mit diesem (3-pin CHA_FAN1) Anschluss und passen Sie den (siehe S.2 - No. 16) schwarzen Draht dem Erdungsstift an. ASRock 775XFire-VSTA Motherboard...
  • Seite 88 Wenn allerdings zwei Grafikkarten gleichzeitig am SLI/XFIRE_POWER1 Motherboard angeschlossen sind, verbinden Sie diesen Anschluss bitte mit einem Festplatten-Stromversorgungs- stecker. Game-Anschluss Verbinden Sie ein Game-Kabel Anschluss, wenn diesem (15-pin GAME1) der Game-Anschlusshalter (siehe S.2 - No. 23) installiert ist. ASRock 775XFire-VSTA Motherboard...
  • Seite 89 Ende (A) des HDMI_SPDIF-Kabels mit dem HDMI_SPDIF-Anschluss am Motherboard. Schließen Sie dann das weiße Ende (B oder C) des HDMI_SPDIF-Kabels an den HDMI_SPDIF-Anschluss der HDMI-VGA-Karte an. A. Schwarzes Ende B. Weißes Ende (zweipolig) C. Weißes Ende (dreipolig) ASRock 775XFire-VSTA Motherboard...
  • Seite 90 In der Abbildung sehen Sie ein Beispiel für einen falschen Anschluss: Hier wird versucht, das HDMI_SPDIF-Kabel mit dem Lüfteranschluss der PCI Express-VGA-Karte zu verbinden. Schauen Sie in die Dokumentation Ihrer VGA-Karte und informieren Sie sich schon im Vorfeld über die richtige Nutzung der Anschlüsse. ASRock 775XFire-VSTA Motherboard...
  • Seite 91: Hot-Plug- Und Hot-Swap-F

    2.12 2.12 Hot-Plug- und Hot-Swap-F unktion für SA estplatten Das Motherboard 775XFire-VSTA unterstützt Hot-Plug-Funktion für SATA-Geräte. HINWEIS Was ist die Hot-Plug-Funktion? Wenn SATA-Festplatten NICHT für RAID-Konfiguration eingestellt sind, werden sie “Hot-Plug” genannt: Ein Einfügen und Entfernen von SATA-Festplatten, während das System in Betrieb ist und einwandfrei läuft.
  • Seite 92 B. Stellen Sie “ATA/IDE-Konfiguration” auf [Erweitert] ein, stellen Sie danach “SATA konfigureren als” auf [RAID] ein. SCHRITT 2: SATA-Treiberdiskette erstellen. A. Legen Sie die ASRock Support-CD in Ihr optisches Laufwerk, um Ihr System hochzufahren. (Legen Sie zu diesem Zeitpunkt KEINE Diskette in das Diskettenlaufwerk ein!) B.
  • Seite 93 2. Richten Sie das BIOS gemäß Schritt 1 auf Seite 92 ein. Danach beenden Sie das BIOS Setup. 3. Erstellen Sie eine SATA-Treiberdiskette - Schritt 2 auf Seite 92. Beginnen Sie mit ® der Windows -Einrichtung, indem Sie von der Installations-CD starten. ASRock 775XFire-VSTA Motherboard...
  • Seite 94 Festplatte erstellen“) aus dem Aktionen-Menü. Ein Assistant zum Erstellen eines RAID-Volume aus vorhandener Festplatte öffnet sich. Klicken Sie sich durch die Dialogfenster. Dabei ist es wichtig, dass Sie wissen, was beim Migrationsvorgang geschieht, da sämtliche auf dem Ziellaufwerk vorhandenen Daten gelöscht werden. ASRock 775XFire-VSTA Motherboard...
  • Seite 95: Windows Vista Funktionalität Installieren

    Vista / Vista 64-Bit Betriebssystem auf Ihrem System zu installieren. Wenn die Frage “Wo möchten Sie Windows installieren?” erscheint, legen Sie bitte die ASRock Support CD in Ihr optisches Laufwerk ein. Klicken Sie anschließend die “Treiber laden”-Schaltfläche links ® ®...
  • Seite 96: Bit Ohne Raid-Funktionalität Installieren

    Sie dazu aufgefordert werden. Nach dem Einlesen der Diskette wid der entsprechende Treiber angezeigt. Wählen Sie den zu installierenden Treiber passend zum gewünschten Modus und zum Betriebssystem. Sie können wählen: “Intel(R) 82801FR SATA AHCI Controller (Desktop ICH6R-Windows XP/2000)” oder “Intel(R) 82801FR SATA AHCI Controller (Desktop ICH6R-Windows XP64)”. ASRock 775XFire-VSTA Motherboard...
  • Seite 97: Windows Vista

    A. Rufen Sie das BIOS SETUP UTILITY auf, wählen Sie den „Advanced“- Bildschirm (Erweitert), dann „IDE Configuration“ (IDE-Konfiguration). B. Stellen Sie “ATA/IDE-Konfiguration” auf [Erweitert] ein, stellen Sie danach “SATA konfigureren als” auf [IDE] ein. ® SCHRITT 2: Installieren Sie Windows Vista / Vista 64-Bit in Ihrem System. ASRock 775XFire-VSTA Motherboard...
  • Seite 98 Dieses Motherboard ist bestückt mit Intel LGA 775 Sockel, dem neuen CPU- Sockel von Intel. Die CPU hat viele kleine Kontakte, die durch unsachgemäße Handhabung leicht beschädigt werden können, ASRock bietet Ihnen deshalb mit diesem „LGA 775 CPU Installation Live-Demo” eine klare und leicht verständliche Installationsanleitung.
  • Seite 99: Contenu Du Paquet

    1. Introduction Merci pour votre achat d’une carte mère ASRock 775XFire-VSTA, une carte mère très fiable produite selon les critères de qualité rigoureux de ASRock. Elle offre des performances excellentes et une conception robuste conformément à l’engagement d’ASRock sur la qualité et la fiabilité au long terme.
  • Seite 100 - Supporte DDRII533 - Max. 4Go (voir ATTENTION 3) L’accélérateur - Contrôle direct de la fréquence CPU (voir ATTENTION 4) hybride - ASRock U-COP (voir ATTENTION 5) - Garde d’échec au démarrage (B.F.G.) Slot d’extension - Prend en charge ATI CrossFire...
  • Seite 101 - Microsoft Windows 2000 / XP / XP 64-bit / Vista / Vista 64-bit (voir ATTENTION 9) Certifications - FCC, CE, WHQL 1 0 1 1 0 1 1 0 1 1 0 1 1 0 1 ASRock 775XFire-VSTA Motherboard...
  • Seite 102 Web à l’avenir. Veuillez visite notre site Web pour obtenir ® ® le pilote Microsoft Windows Vista / Vista 64-bits et les informations liées. Site Web ASRock http://www.asrock.com 1 0 2 1 0 2 1 0 2 1 0 2 1 0 2 ASRock 775XFire-VSTA Motherboard...
  • Seite 103 Celeron D 326 Mémoire 512 Mo Canal simple Adaptateur VGA DX9.0 avec pilote WDDM avec mémoire VGA 128bits (Premium) avec mémoire VGA 64bits (Basic) 1 0 3 1 0 3 1 0 3 1 0 3 1 0 3 ASRock 775XFire-VSTA Motherboard...
  • Seite 104 5. Lorsque vous placez les vis dans les orifices pour vis pour fixer la carte mère sur le châssis, ne serrez pas trop les vis ! Vous risquez sinon d’endommager la carte mère. 1 0 4 1 0 4 1 0 4 1 0 4 1 0 4 ASRock 775XFire-VSTA Motherboard...
  • Seite 105 Etape 2-2. Orientez le paquet avec le dissipateur thermique intégré (IHS) vers le haut. Repérez la broche 1 et les deux encoches d’orientation. 1 0 5 1 0 5 1 0 5 1 0 5 1 0 5 ASRock 775XFire-VSTA Motherboard...
  • Seite 106 Etape 4-3. Fixez le levier de chargement avec la languette de la plaque de chargement sous la languette de retenue du levier de chargement. 1 0 6 1 0 6 1 0 6 1 0 6 1 0 6 ASRock 775XFire-VSTA Motherboard...
  • Seite 107 1 0 7 1 0 7 1 0 7 1 0 7 1 0 7 ASRock 775XFire-VSTA Motherboard...
  • Seite 108 2.3 Installation des modules m émoire [DIMM] 2.3 Installation des modules m émoire [DIMM] La carte mère 775XFire-VSTA dispose de quatre emplacements DIMM DDRII (Double Data Rate II) de 240-broches, et supporte la Technologie de Mémoire à Canal Double. Pour effectuer une configuration à canal double, vous devez toujours installer des paires de DIMM DDRII identiques (de la même marque, de la...
  • Seite 109 Insérez fermement le module DIMM dans son emplacement jusqu’à ce que les clips de maintien situés aux deux extrémités se ferment complètement et que le module DIMM soit inséré correctement. 1 0 9 1 0 9 1 0 9 1 0 9 1 0 9 ASRock 775XFire-VSTA Motherboard...
  • Seite 110 (Slots PCI, PCI Express et AGI Express) Il y a 3 slots PCI , 2 slots PCI Express et 1 slot AGI Express (PCI Express x4) sur les cartes mères 775XFire-VSTA. Slots PCI: Les slots PCI sont utilisés pour installer des cartes d’extension dotées d’une interface PCI 32 bits.
  • Seite 111 Windows ® XP avec le Service Pack 2; elle sera compatible avec d’autres systèmes d’exploitation dans le futur. 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 ASRock 775XFire-VSTA Motherboard...
  • Seite 112 PCIEx1_EN1-4: Court-circuiter PCIEx1_EN5: Court-circuiter la broche 1 et la broche 2 la broche 1 et la broche 2 1 1 2 1 1 2 1 1 2 1 1 2 1 1 2 ASRock 775XFire-VSTA Motherboard...
  • Seite 113 (Si vous installez deux cartes graphiques standard Radeon (CrossFire Ready) à cette carte mère, passez cette étape.) 1 1 3 1 1 3 1 1 3 1 1 3 1 1 3 ASRock 775XFire-VSTA Motherboard...
  • Seite 114 Allumez votre ordinateur et démarrez dans le système d’exploitation. Etape 7. Supprimez le pilote ATI si vous avez déjà installé un pilote VGA sur votre système. 1 1 4 1 1 4 1 1 4 1 1 4 1 1 4 ASRock 775XFire-VSTA Motherboard...
  • Seite 115 Vous trouverez ensuite l’icône “ATI Catalyst Control Center” sur votre bureau. Vous trouverez l’icône “ATI Catalyst Control Center” sur votre bureau. 1 1 5 1 1 5 1 1 5 1 1 5 1 1 5 ASRock 775XFire-VSTA Motherboard...
  • Seite 116 CD d’assistance : ..\ Surround Display Information 1 1 6 1 1 6 1 1 6 1 1 6 1 1 6 ASRock 775XFire-VSTA Motherboard...
  • Seite 117 Broche1 Note: Assurez-vous que le côté avec fil rouge du câble est bien branché sur le côté Broche1 du connecteur. 1 1 7 1 1 7 1 1 7 1 1 7 1 1 7 ASRock 775XFire-VSTA Motherboard...
  • Seite 118 Si les ports USB arrières ne sont pas suffisants, cet en-tête USB 2.0 (USB67) est capable de supporter 2 ports USB 2.0 supplémentaires. 1 1 8 1 1 8 1 1 8 1 1 8 1 1 8 ASRock 775XFire-VSTA Motherboard...
  • Seite 119 Gestionnaire audio Realtek HD. Cliquer sur « E/S audio», sélectionner « Paramètres du 1 1 9 1 1 9 1 1 9 1 1 9 1 1 9 ASRock 775XFire-VSTA Motherboard...
  • Seite 120 (voir p.2 No. 3) Connecteur ATX 12V Veuillez connecter une unité d’alimentation électrique ATX (ATX12V1 br.4) 12V sur ce connecteur. (voir p.2 No. 2) 1 2 0 1 2 0 1 2 0 1 2 0 1 2 0 ASRock 775XFire-VSTA Motherboard...
  • Seite 121 HDMI_SPDIF au connecteur HDMI_SPDIF de la carte VGA HDMI. A. extrémité noire B. extrémité blanche C. extrémité blanche (2 briches) (3 briches) 1 2 1 1 2 1 1 2 1 1 2 1 1 2 1 ASRock 775XFire-VSTA Motherboard...
  • Seite 122 HDMI_SPDIF au connecteur du ventilateur de la carte VGA PCI Express. Veuillez vous reporter au préalable au manuel de l’utilisateur de la carte VGA pour l’utilisation du connecteur. 1 2 2 1 2 2 1 2 2 1 2 2 1 2 2 ASRock 775XFire-VSTA Motherboard...
  • Seite 123 Disques Durs SA Disques Durs SA Disques Durs SAT T T T T A A A A A La Carte Mère 775XFire-VSTA supporte la fonction “Hot Plug” pour les périphériques SATA. REMARQUE Qu’est-ce que la fonction « Hot Plug »? Si les disques durs SATA ne sont pas en configuration RAID, l’action...
  • Seite 124 «Configurer SATA comme «, veuillez régler sur [RAID]. ETAP 2: Créez une disquette pilotes SATA. A. Insérez le CD de soutien ASRock dans votre lecteur de disque optique pour démarrer votre système. (N’insérez AUCUNE disquette dans le lecteur de disquette pour l’instant!)
  • Seite 125 , veuillez réinstaller les pilotes SATA à partir du CD d’assistance afin que “Intel Matrix Storage Manager” soit aussi installé dans votre système. 1 2 5 1 2 5 1 2 5 1 2 5 1 2 5 ASRock 775XFire-VSTA Motherboard...
  • Seite 126 SATA disposant d’une capacité égale ou supérieure à celle du lecteur de disque dur source couramment utilisé. 1 2 6 1 2 6 1 2 6 1 2 6 1 2 6 ASRock 775XFire-VSTA Motherboard...
  • Seite 127 “Guide d’installation des disques durs SATA et de configuration RAID, ” qui se trouve dans le dossier sur le chemin suivant : .. \ RAID Installation Guide 1 2 7 1 2 7 1 2 7 1 2 7 1 2 7 ASRock 775XFire-VSTA Motherboard...
  • Seite 128 / Vista 64-bits sur votre système. Lorsque vous voyez la page “Où souhaitez-vous installer Windows ?”, veuillez insérer le CD Support d’ ASRock dans votre lecteur optique, et cliquer sur le bouton “Charger le pilote” en ® ® bas à gauche pour charger les pilotes RAID Intel .
  • Seite 129 «Configurer SATA comme «, veuillez régler sur [IDE]. ® ETAPE 2 : Installez le système d’exploitation Windows 2000 / XP / XP 64 bits sur votre système. 1 2 9 1 2 9 1 2 9 1 2 9 1 2 9 ASRock 775XFire-VSTA Motherboard...
  • Seite 130 «Configurer SATA comme «, veuillez régler sur [IDE]. ETAPE 2: Installer le système d’exploitation Windows ® Vista / Vista 64-bit sur votre système. 1 3 0 1 3 0 1 3 0 1 3 0 1 3 0 ASRock 775XFire-VSTA Motherboard...
  • Seite 131 Intel. Etant donné qu’il possède plusieurs broches minuscules, qui sont facilement endommagées en cas de mauvaise manipulation, ASRock a pris le soin de vous proposer un guide d’installation clair par le biais de cette “Démo vidéo d’installation de processeur LGA 775”.
  • Seite 132: Contenuto Della Confezione

    Grazie per aver scelto una scheda madre ASRock 775XFire-VSTA, una scheda madre affidabile prodotta secondo i severi criteri di qualità ASRock. Le prestazioni eccellenti e il design robusto si conformano all’impegno di ASRock nella ricerca della qualità e della resistenza.
  • Seite 133 - Supporta DDRII533 - Max. 4GB (vedi ATTENZIONE 3) Booster ibrido - Stepless control per frequenza del processore (vedi ATTENZIONE 4) - ASRock U-COP (vedi ATTENZIONE 5) - Boot Failure Guard (B.F.G.) Slot di - Supporto di ATI CrossFire espansione...
  • Seite 134 Windows 2000 / XP / XP 64 bit / Vista Vista 64 bit lità SO (vedi ATTENZIONE 9) Certificazioni- FCC, CE, WHQL 1 3 4 1 3 4 1 3 4 1 3 4 1 3 4 ASRock 775XFire-VSTA Motherboard...
  • Seite 135 Visitare il nostro sito per il ® ® driver Microsoft Windows Vista / Vista 64-bit e relative informazioni. Sito ASRock http://www.asrock.com 1 3 5 1 3 5 1 3 5 1 3 5 1 3 5 ASRock 775XFire-VSTA Motherboard...
  • Seite 136 Celeron D 326 Memoria 512MB ad un canale DX9.0 con driver WDDM Con memoria VGA 128bit (Premium) Con memoria VGA 64bit (Basic) 1 3 6 1 3 6 1 3 6 1 3 6 1 3 6 ASRock 775XFire-VSTA Motherboard...
  • Seite 137 5. Nell’usare i giraviti per fissare la scheda madre al telaio non serrare eccessivamente le viti! Altrimenti si rischia di danneggiare la scheda madre. 1 3 7 1 3 7 1 3 7 1 3 7 1 3 7 ASRock 775XFire-VSTA Motherboard...
  • Seite 138 Fase 2. Inserire la CPU 775-Pin: Fase 2-1. Tenere la CPU dai bordi segnati con linee nere. 1 3 8 1 3 8 1 3 8 1 3 8 1 3 8 ASRock 775XFire-VSTA Motherboard...
  • Seite 139 Fase 4-1. Ruotare la piastra di carico sull’IHS. Fase 4-2. Bloccare la leva di carico mentre si preme leggermente sulla piastra di carico. 1 3 9 1 3 9 1 3 9 1 3 9 1 3 9 ASRock 775XFire-VSTA Motherboard...
  • Seite 140 Fase 6. fissare il cavo in eccesso con fascette per assicurare che il cavo non interferisca con il funzionamento della ventola o che venga a contatto con gli altri componenti. 1 4 0 1 4 0 1 4 0 1 4 0 1 4 0 ASRock 775XFire-VSTA Motherboard...
  • Seite 141 2.3 Installazione dei moduli di memoria (DIMM) 2.3 Installazione dei moduli di memoria (DIMM) La scheda madre 775XFire-VSTA fornisce quattro alloggiamenti DIMM DDRII (Double Data Rate II) a 240 pin, e supporta la tecnologia Dual Channel Memory. Per la configurazione a due canali, è necessario installare sempre coppie identiche (stessa marca, velocità, dimensioni e tipo di chip) di DIMM DDRII negli alloggiamenti...
  • Seite 142 Inserire saldamente la DIMM nello slot fino a far scattare completamente in posizione i fermagli di ritegno alle due estremità e fino ad installare correttamente la DIMM nella sua sede. 1 4 2 1 4 2 1 4 2 1 4 2 1 4 2 ASRock 775XFire-VSTA Motherboard...
  • Seite 143 AGI Express) AGI Express) Esistono 3 slot PCI, 2 slot PCI Express e 1 slot AGI Express (PCI Express x4) su entrambe le schede madri 775XFire-VSTA. Slot PCI: Sono utilizzati per installare schede di espansione con Interfaccia PCI a 32-bit.
  • Seite 144 Serie Radeon X1650Pro Serie Radeon X1600 Serie Radeon X1600 Serie Radeon X1300 Serie Radeon X1300 Serie Radeon X850 Radeon X850 CrossFire Edition 1 4 4 1 4 4 1 4 4 1 4 4 1 4 4 ASRock 775XFire-VSTA Motherboard...
  • Seite 145 Installare la scheda grafica standard Radeon (CrossFire Ready) nell’alloggio AGI Express (PCI Express x4). Fare riferimento alla sezione “Alloggi d’espansione” per le appropriare procedure d’installazione. 1 4 5 1 4 5 1 4 5 1 4 5 1 4 5 ASRock 775XFire-VSTA Motherboard...
  • Seite 146 (Se si installano due schede grafiche standard Radeon (CrossFire Ready) a questa scheda madre, saltare questo punto.) Connettore Cavo Connettore DVI-DMS 1 4 6 1 4 6 1 4 6 1 4 6 1 4 6 ASRock 775XFire-VSTA Motherboard...
  • Seite 147 Si raccomanda di usare questa utilità per rimuovere tutti i driver Catalyst installati in precedenza, prima di eseguire l’installazione. Visitare il seguente sito per scaricare i driver: http://support.ati.com/ics/support/DLRedirect.asp? fileIDExt=050553d40196ef109fff37cbb40aaf28&accountID=737&deptID=894 1 4 7 1 4 7 1 4 7 1 4 7 1 4 7 ASRock 775XFire-VSTA Motherboard...
  • Seite 148 Installare i driver scheda VGA sul sistema e riavviare il computer. Quindi sul desktop si troverà l’icona “ATI Catalyst Control Center”. Sul desktop si troverà l’icona “ATI Catalyst Control Center”. 1 4 8 1 4 8 1 4 8 1 4 8 1 4 8 ASRock 775XFire-VSTA Motherboard...
  • Seite 149 Technologies Inc., ed è usato solamente a scopo identificativo o esplicativo a beneficio del proprietario, senza alcuna intenzione di violare i diritti d’autore. 1 4 9 1 4 9 1 4 9 1 4 9 1 4 9 ASRock 775XFire-VSTA Motherboard...
  • Seite 150 CLRCMOS1 per 3 secondi. Per favore ricordarsi di rimuovere il jumper cap dopo la pulizia della CMOS. 1 5 0 1 5 0 1 5 0 1 5 0 1 5 0 ASRock 775XFire-VSTA Motherboard...
  • Seite 151 Cavi dati Serial ATA Entrambe le estremità del cavo (SATA) dati SATA possono collegarsi all’hard disk SATA o al (Opzionale) connettore SATA sulla scheda madre. 1 5 1 1 5 1 1 5 1 1 5 1 1 5 1 ASRock 775XFire-VSTA Motherboard...
  • Seite 152 È un’interfaccia per il cavo del pannello frontale pannello audio. Che consente connessione facile e controllo (9-pin HD_AUDIO1) dei dispositivi audio. (vedi p.2 Nr. 24) 1 5 2 1 5 2 1 5 2 1 5 2 1 5 2 ASRock 775XFire-VSTA Motherboard...
  • Seite 153 Collegare il cavo della ventolina CPU a questo connettore e far (4-pin CPU_FAN1) combaciare il filo nero al pin (vedi p.2 Nr. 6) terra. 1 5 3 1 5 3 1 5 3 1 5 3 1 5 3 ASRock 775XFire-VSTA Motherboard...
  • Seite 154 (vedi p.2 Nr. 25) sistema di collegare dispositivi per TV digitale HDMI/proiettori/ LCD . Collegare il connettore HDMI_SPDIF della scheda VGA HDMI a questo header. 1 5 4 1 5 4 1 5 4 1 5 4 1 5 4 ASRock 775XFire-VSTA Motherboard...
  • Seite 155 (2 pin e 3 pin). Scegliere l’estremità bianca adeguata in base al connettore HDMI_SPDIF della scheda HDMI VGA che si inserisce. 1 5 5 1 5 5 1 5 5 1 5 5 1 5 5 ASRock 775XFire-VSTA Motherboard...
  • Seite 156 4° PASSO: Collegare l’altra estremità del cavo dati SATA all’hard disk SATA. Non si consiglia di cambiare l’impostazione “Configure SATA as” (Configura SATA come) sul modo AHCI, RAID e IDE dopo l’installazione OS. 1 5 6 1 5 6 1 5 6 1 5 6 1 5 6 ASRock 775XFire-VSTA Motherboard...
  • Seite 157 SA dischi rigidi SA dischi rigidi SAT T T T T A A A A A La scheda madre 775XFire-VSTA supporta la funzione di collegamento e scambio a caldo per i dispositivi SATA. NOTA Che cosa è la funzione di collegamento a caldo? Se i dischi rigidi SATA NON sono impostati per una configurazione RAID, è...
  • Seite 158 [RAID]. Passo 2: Creare un dischetto driver SATA. A. Inserire il CD di supporto ASRock nel lettore ottico prima di accendere il sistema. (NON inserire nessun dischetto floppy nel drive in questo momento!) B. Durante la fase di POST, all’inzio del boot-up del sistema, premere il tasto <F11>.
  • Seite 159 7. Dopo aver impostato un sistema “RAID Ready” come nei punti di seguito, seguire le procedure della sezione successiva per passare su RAID 0 o RAID 1. 1 5 9 1 5 9 1 5 9 1 5 9 1 5 9 ASRock 775XFire-VSTA Motherboard...
  • Seite 160 (Migliorata) e poi, nell’opzione“Configure SATA as” (Configura SATA come), impostare l’opzione su [RAID]. Passo 2: Usare “RAID Installation Guide” per impostare la configurazione RAID. 1 6 0 1 6 0 1 6 0 1 6 0 1 6 0 ASRock 775XFire-VSTA Motherboard...
  • Seite 161 64-bit sul sistema. Quando si vede la pagina “Where do you want to install Windows?” (Dove si vuole eseguire l’istallazione di Windows), inserire il CD di supporto ASRock nell’unità ottica e fare clic sul pulsante “Carica driver” , in ®...
  • Seite 162 (Migliorata) e poi, nell’opzione“Configure SATA as” (Configura SATA come), impostare l’opzione su [IDE]. ® Passo 2: Installazione di Windows 2000 / XP / XP 64-bit sul sistema. 1 6 2 1 6 2 1 6 2 1 6 2 1 6 2 ASRock 775XFire-VSTA Motherboard...
  • Seite 163 (Migliorata) e poi, nell’opzione“Configure SATA as” (Configura SATA come), impostare l’opzione su [IDE]. ® Passo 2: Installazione di Windows Vista / Vista 64-bit sul sistema. 1 6 3 1 6 3 1 6 3 1 6 3 1 6 3 ASRock 775XFire-VSTA Motherboard...
  • Seite 164 CPU rilasciata da Intel. Poichè è dotata di una serie di pin molto sottili, che possono essere facilmente rovinati se non utilizzati correttamente, ASRock presenta una guida all’installazione molto chiara con questo “Demo installazione CPU LGA 775”. Ci auguriamo che questo demo venga consultato prima di procedere all’installazione della CPU LGA 775 per ridurre i rischi di danni alla CPU e...
  • Seite 165: Contenido De La Caja

    1. Introducción 1. Introducción Gracias por su compra de ASRock 775XFire-VSTA placa madre, una placa de confianza producida bajo el control de calidad estricto y persistente. La placa madre provee realización excelente con un diseño robusto conforme al compromiso de calidad y resistencia de ASRock.
  • Seite 166 - Soporta DDRII533 - Max. 4GB (vea ATENCIÓN 3) Amplificador - Stepless control de frecuencia de CPU (vea ATENCIÓN 4) Híbrido - ASRock U-COP (vea ATENCIÓN 5) - Protección de Falla de Inicio (B.F.G..) Ranuras de - Soporta ATI CrossFire Expansión...
  • Seite 167 ® 2000 / XP / XP 64 bits / Vista / Vista 64 bits (vea ATENCIÓN 9) Certificaciones - FCC, CE, WHQL 1 6 7 1 6 7 1 6 7 1 6 7 1 6 7 ASRock 775XFire-VSTA Motherboard...
  • Seite 168 Web si desea obtener el controlador para Microsoft ® Windows ® Vista Vista 64 bits así como la información relacionada. Sitio Web de ASRock: http://www.asrock.com 1 6 8 1 6 8 1 6 8 1 6 8 1 6 8 ASRock 775XFire-VSTA Motherboard...
  • Seite 169 512 MB de un solo canal DX9.0 con controlador WDDM con memoria VGA de 128 bit (Premium) con memoria VGA de 64 bit (Basic) 1 6 9 1 6 9 1 6 9 1 6 9 1 6 9 ASRock 775XFire-VSTA Motherboard...
  • Seite 170 No introduzca la CPU en el socket por la fuerza si se produce la situación anterior. Si lo hace, puede producir daños graves en la CPU. 1 7 0 1 7 0 1 7 0 1 7 0 1 7 0 ASRock 775XFire-VSTA Motherboard...
  • Seite 171 Step 2-4. Compruebe que la CPU se encuentra en el socket y la orientación coincide con la indicada por las muescas. 1 7 1 1 7 1 1 7 1 1 7 1 1 7 1 ASRock 775XFire-VSTA Motherboard...
  • Seite 172 (Aplique el material termal de interfaz) Paso 1. Aplique el material termal de interfaz en el centro del IHS de la superficie del socket. 1 7 2 1 7 2 1 7 2 1 7 2 1 7 2 ASRock 775XFire-VSTA Motherboard...
  • Seite 173 Paso 6. Fije el cable que sobre con un lazo para asegurarse de que el cable no interfiere en el funcionamiento del ventilador y tampoco entra en contacto con otros componentes. 1 7 3 1 7 3 1 7 3 1 7 3 1 7 3 ASRock 775XFire-VSTA Motherboard...
  • Seite 174 2.3 Instalación de Memoria 2.3 Instalación de Memoria La placa 775XFire-VSTA ofrece cuatro ranuras DIMM DDRII de 240 pines, y soporta Tecnología de Memoria de Doble Canal. Para la configuración de doble canal, necesitará instalar siempre pares DIMM DDRII idénticos (de la misma marca, velocidad, tamaño y tipo) en las ranuras del mismo color.
  • Seite 175 Paso 3. Inserte la DIMM con firmeza dentro de la ranura hasta que los clips de sujeción de ambos lados queden completamente introducidos en su sitio y la DIMM se haya asentado apropiadamente. 1 7 5 1 7 5 1 7 5 1 7 5 1 7 5 ASRock 775XFire-VSTA Motherboard...
  • Seite 176 Express) Express) Hay 3 ranuras PCI, 2 ranura PCI Express y 1 ranura AGI Express (PCI Express x 4) sobre las placas mardres 775XFire-VSTA. Ranuras PCI: Para instalar tarjetas de expansión que tienen 32-bit Interface PCI. Ranura PCI Express: PCIE1 (ranura PCIE x16) se utiliza para tarjetas PCI Ex press con tarjetas gráficas con una anchura de 16...
  • Seite 177 ® caso de Windows Vista . Consulte la página web de ATI para descargar controladores actualizados. 1 7 7 1 7 7 1 7 7 1 7 7 1 7 7 ASRock 775XFire-VSTA Motherboard...
  • Seite 178 Express (PCI Express x4). Por favor, consulte las siguientes imágenes para configurar adecuadamente los puentes. PCIEx1_EN1-4: Pin corto 1, Pin2 PCIEx1_EN5: Pin corto 1, Pin2 1 7 8 1 7 8 1 7 8 1 7 8 1 7 8 ASRock 775XFire-VSTA Motherboard...
  • Seite 179 (Si instala dos tarjetas gráficas Radeon estándar (compatibles con CrossFire™) en esta placa base, ignore este paso). 1 7 9 1 7 9 1 7 9 1 7 9 1 7 9 ASRock 775XFire-VSTA Motherboard...
  • Seite 180 Catalyst previamente instalado antes de empezar la instalación. Por favor, visite este sitio web para conseguir el controlador. http://support.ati.com/ics/support/DLRedirect.asp? fileIDExt=050553d40196ef109fff37cbb40aaf28&accountID=737&deptID=894 1 8 0 1 8 0 1 8 0 1 8 0 1 8 0 ASRock 775XFire-VSTA Motherboard...
  • Seite 181 En ese momento, podrá encontrar “ATI Catalyst Control Center” en su escritorio. Podrá encontrar “ATI Catalyst Control Center” en su escritorio. 1 8 1 1 8 1 1 8 1 1 8 1 1 8 1 ASRock 775XFire-VSTA Motherboard...
  • Seite 182 Technologies, Inc., y se usa sólo para identificación o explicación y para el beneficio de los propietarios, sin intención de infringir sus derechos. 1 8 2 1 8 2 1 8 2 1 8 2 1 8 2 ASRock 775XFire-VSTA Motherboard...
  • Seite 183 CLRCMOS1 por más que 3 segundos usando un jumper cap. Por favor acuérdase de quitar el jumper cap después de limpiar el COMS. 1 8 3 1 8 3 1 8 3 1 8 3 1 8 3 ASRock 775XFire-VSTA Motherboard...
  • Seite 184 SATA Connettere al gruppo cable de alimentación SATA a di alimentazione la conexión de alimentación de la fuente de alimentación. 1 8 4 1 8 4 1 8 4 1 8 4 1 8 4 ASRock 775XFire-VSTA Motherboard...
  • Seite 185 HDA para operar correctamente. Por favor, siga las instrucciones en nuestro manual y en el manual de chasis para instalar su sistema. 1 8 5 1 8 5 1 8 5 1 8 5 1 8 5 ASRock 775XFire-VSTA Motherboard...
  • Seite 186 3 contactos en el conector del ventilador de procesador de esta placa base, conéctelo al contacto 1-3. Contacto 1-3 conectado Instalación del ventilador de 3 contactos 1 8 6 1 8 6 1 8 6 1 8 6 1 8 6 ASRock 775XFire-VSTA Motherboard...
  • Seite 187 TV Digital HDMI / proyectores / Dispositivos LCD. Conecte el conector HDMI_SPDIF de la tarjeta VGA HDMI a esta cabecera. 1 8 7 1 8 7 1 8 7 1 8 7 1 8 7 ASRock 775XFire-VSTA Motherboard...
  • Seite 188 3 patillas) en el cable HDMI_SPDIF. Seleccione el extremo blanco adecuado según el conector HDMI_SPDIF de la tarjeta VGA HDMI que instale. 1 8 8 1 8 8 1 8 8 1 8 8 1 8 8 ASRock 775XFire-VSTA Motherboard...
  • Seite 189: Configuración Raid

    No está recomendado cambiar el selector “Configure SATA as” (Configurar SATA como) entre los modos AHCI, RAID, e IDE después de la instalación del 1 8 9 1 8 9 1 8 9 1 8 9 1 8 9 ASRock 775XFire-VSTA Motherboard...
  • Seite 190 HDDs SA HDDs SAT T T T T A A A A A HDDs SA HDDs SA La placa base 775XFire-VSTA soporta la función de conexión en caliente para Dispositivos SATA. NOTA ¿Qué es la función de conexión en caliente? Si los HDDs SATA no están fijados para su configuración RAID, se...
  • Seite 191 (“Configurar SATA como”) a [RAID]. PASO 2: Haga un disquete del controlador SATA. Inserte el CD de soporte de ASRock en la unidad óptica de la unidad para iniciar el sistema. (NO inserte ningún disquete en la unidad de disco en este momento) B.
  • Seite 192 7. Después de configurar un sistema “RAID Ready” siguiendo los pasos anteriores, puede seguir Los procedimientos de la sección siguiente para migrar el sistema de RAID 0 o RAID 1. 1 9 2 1 9 2 1 9 2 1 9 2 1 9 2 ASRock 775XFire-VSTA Motherboard...
  • Seite 193 Antes de comenzar a configurar la función RAID, es necesario comprobar la guía de instalación en el CD de soporte para obtener la configuración apropiada. 1 9 3 1 9 3 1 9 3 1 9 3 1 9 3 ASRock 775XFire-VSTA Motherboard...
  • Seite 194 64 bits en el equipo. Cuando aparezca la página “Where do you want to install Windows?” (¿Dónde desea instalar Windows?), inserte el CD de soporte de ASRock en la unidad óptica y haga clic en el botón “Load Driver” (Cargar controlador) situado en la parte inferior izquierda para ®...
  • Seite 195 (Optimizada), y luego configure la opción que aparece en “Configure SATA as” (“Configurar SATA como”) a [IDE]. PASO 2: Instale Windows ® 2000 / XP / XP 64 bits en su sistema. 1 9 5 1 9 5 1 9 5 1 9 5 1 9 5 ASRock 775XFire-VSTA Motherboard...
  • Seite 196 (Optimizada), y luego configure la opción que aparece en “Configure SATA as” (“Configurar SATA como”) a [IDE]. PASO 2: Instale Windows ® Vista / Vista 64 bits en su sistema. 1 9 6 1 9 6 1 9 6 1 9 6 1 9 6 ASRock 775XFire-VSTA Motherboard...
  • Seite 197 CPU que Intel ha desarrollado. Ya que es fácil dañar sus pequeñas agujas si no se manejan de la manera adecuada, ASRock proporciona una guía de instalación clara y concisa mediante esta “Demo de instalación de la CPU LGA 775”.

Inhaltsverzeichnis