Herunterladen Inhalt Inhalt Diese Seite drucken
ASROCK 775i65G Schnellinstallationsanleitung
Vorschau ausblenden Andere Handbücher für 775i65G:

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 19
Copyright Notice:
Copyright Notice:
Copyright Notice:
Copyright Notice:
Copyright Notice:
No part of this installation guide may be reproduced, transcribed, transmitted, or trans-
lated in any language, in any form or by any means, except duplication of documen-
tation by the purchaser for backup purpose, without written consent of ASRock Inc.
Products and corporate names appearing in this guide may or may not be registered
trademarks or copyrights of their respective companies, and are used only for identifica-
tion or explanation and to the owners' benefit, without intent to infringe.
Disclaimer:
Disclaimer:
Disclaimer:
Disclaimer:
Disclaimer:
Specifications and information contained in this guide are furnished for informational
use only and subject to change without notice, and should not be constructed as a
commitment by ASRock. ASRock assumes no responsibility for any errors or omissions
that may appear in this guide.
With respect to the contents of this guide, ASRock does not provide warranty of any kind,
either expressed or implied, including but not limited to the implied warranties or
conditions of merchantability or fitness for a particular purpose. In no event shall
ASRock, its directors, officers, employees, or agents be liable for any indirect, special,
incidental, or consequential damages (including damages for loss of profits, loss of
business, loss of data, interruption of business and the like), even if ASRock has been
advised of the possibility of such damages arising from any defect or error in the guide
or product.
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation.
CALIFORNIA, USA ONLY
The Lithium battery adopted on this motherboard contains Perchlorate, a toxic
substance controlled in Perchlorate Best Management Practices (BMP) regulations
passed by the California Legislature. When you discard the Lithium battery in
California, USA, please follow the related regulations in advance.
"Perchlorate Material-special handling may apply, see
www.dtsc.ca.gov/hazardouswaste/perchlorate"
ASRock Website: http://www.asrock.com
Copyright©2007 ASRock INC. All rights reserved.
ASRock 775i65G Motherboard
Published February 2007
1 1 1 1 1

Werbung

Inhaltsverzeichnis
loading

Inhaltszusammenfassung für ASROCK 775i65G

  • Seite 1 ASRock. ASRock assumes no responsibility for any errors or omissions that may appear in this guide. With respect to the contents of this guide, ASRock does not provide warranty of any kind, either expressed or implied, including but not limited to the implied warranties or conditions of merchantability or fitness for a particular purpose.
  • Seite 2 PCI Slots (PCI1- 3) Primary Serial ATA Connector (SATA1) AGP Slot (1.5V_AGP1) Chassis Fan Connector (CHA_FAN1) BIOS FWH Chip System Panel Header (PANEL1) Shared USB 2.0 Header (USB4_5, Blue) Chassis Speaker Header (SPEAKER 1) 2 2 2 2 2 ASRock 775i65G Motherboard...
  • Seite 3 USB 2.0 Ports (USB01) RJ-45 Port USB 2.0 Ports (USB23) Line In (Light Blue) VGA Port Line Out (Lime) PS/2 Keyboard Port (Purple) Microphone (Pink) PS/2 Mouse Port (Green) Shared USB 2.0 Ports (USB45) 3 3 3 3 3 ASRock 775i65G Motherboard...
  • Seite 4: Package Contents

    1. Introduction 1. Introduction 1. Introduction 1. Introduction Thank you for purchasing ASRock 775i65G motherboard, a reliable motherboard produced under ASRock’s consistently stringent quality control. It delivers excellent performance with robust design conforming to ASRock’s commitment to quality and endurance.
  • Seite 5: Specifications

    - Support DDR400/333/266 (see CAUTION 5) - Max. capacity: 2GB Hybrid Booster - CPU Frequency Stepless Control (see CAUTION 6) - ASRock U-COP (see CAUTION 7) - Boot Failure Guard (B.F.G.) Expansion Slot - 3 x PCI slots - 1 x AGP slot for 1.5V 8X/4X AGP card (see CAUTION 8) - 1 x AMR slot ®...
  • Seite 6 Overclocking may affect your system stability, or even cause damage to the components and devices of your system. It should be done at your own risk and expense. We are not responsible for possible damage caused by overclocking. 6 6 6 6 6 ASRock 775i65G Motherboard...
  • Seite 7 It may cause permanent damage! ® ® Power Management for USB 2.0 works fine under Microsoft Windows ® SP1 or SP2 / 2000 SP4. It may not work properly under Microsoft Win- dows ® 98/ ME. 7 7 7 7 7 ASRock 775i65G Motherboard...
  • Seite 8: Cpu Installation

    CPU surface is unclean or if there is any bent pin on the socket. Do not force to insert the CPU into the socket if above situation is found. Otherwise, the CPU will be seriously damaged. 8 8 8 8 8 ASRock 775i65G Motherboard...
  • Seite 9 Use your left hand index finger and thumb to support the load plate edge, engage PnP cap with right hand thumb and peel the cap from the socket while pressing on center of PnP cap to assist in removal. 9 9 9 9 9 ASRock 775i65G Motherboard...
  • Seite 10 Step 5. Connect fan header with the CPU fan connector on the motherboard. Step 6. Secure excess cable with tie-wrap to ensure cable does not interfere with fan operation or contact other components. ASRock 775i65G Motherboard...
  • Seite 11: Installing A Dimm

    DIMM if you force the DIMM into the slot at incorrect orientation. Step 3. Firmly insert the DIMM into the slot until the retaining clips at both ends fully snap back in place and the DIMM is properly seated. ASRock 775i65G Motherboard...
  • Seite 12: Installing An Expansion Card

    PCI slots: The PCI slots are used to install expansion cards that have the 32-bit PCI interface. AGP slot: The AGP slot is used to install a graphics card. The ASRock AGP slot has a special design of clasp that can securely fasten the inserted graphics card.
  • Seite 13 To clear and reset the system parameters to default setup, please turn off the computer and unplug the power cord from the power supply. After waiting for 15 seconds, use a jumper cap to short 2 pins on CLRCMOS0 for 5 seconds. ASRock 775i65G Motherboard...
  • Seite 14 1.5 Gb/s data transfer rate. Serial ATA (SATA) Either end of the SATA data cable Data Cable can be connected to the SATA hard disk or the SATA connector (Optional) on the motherboard. ASRock 775i65G Motherboard...
  • Seite 15 (AUX1: see p.2 No. 25) AUX1 tuner card, or MPEG card. Front Panel AC’97 Audio Header This is an interface for the front panel audio cable that allows (8-pin AUDIO1) convenient connection and (see p.2 No. 22) control of audio devices. ASRock 775i65G Motherboard...
  • Seite 16 Please note that it is necessary to connect a power supply with (4-pin ATX12V1) ATX 12V plug to this connector (see p.2 No. 2) so that it can provides sufficient power. Failing to do so will cause the failure to power up. ASRock 775i65G Motherboard...
  • Seite 17 Then, the drivers compatible to your system can be auto-detected and listed on the support CD driver page. Please follow the order from up to bottom side to install those required drivers. Therefore, the drivers you install can work properly. ASRock 775i65G Motherboard...
  • Seite 18 Main Menu automatically if “AUTORUN” is enabled in your computer. If the Main Menu does not appear automatically, locate and double-click on the file “ASSETUP.EXE” from the BIN folder in the Support CD to display the menus. ASRock 775i65G Motherboard...
  • Seite 19 1. Einführung 1. Einführung 1. Einführung Wir danken Ihnen für den Kauf des ASRock 775i65G Motherboard, ein zuverlässiges Produkt, welches unter den ständigen, strengen Qualitätskontrollen von ASRock gefertigt wurde. Es bietet Ihnen exzellente Leistung und robustes Design, gemäß der Verpflichtung von ASRock zu Qualität und Halbarkeit.
  • Seite 20: Spezifikationen

    - 2 x Steckplätze für DDR - Unterstützt DDR400/333/266 (siehe VORSICHT 5) - Max. 2GB Hybrid Booster - Schrittloser CPU-Frequenz-Kontrolle (siehe VORSICHT 6) - ASRock U-COP (siehe VORSICHT 7) - Boot Failure Guard (B.F.G. – Systemstartfehlerschutz) Erweiterungs- - 3 x PCI -Steckplätze steckplätze - 1x AGP -Steckplätze, unterstützt 1.5V, 8X/4X AGP-Karten...
  • Seite 21 Dritten, mit einem gewissen Risiko behaftet ist. Overclocking kann sich nachteilig auf die Stabilität Ihres Systems auswirken oder sogar Komponenten und Geräte Ihres Systems beschädigen. Es geschieht dann auf eigene Gefahr und auf Ihre Kosten. Wir übernehmen keine Verantwortung für mögliche Schäden, die aufgrund von Overclocking verursacht wurden. ASRock 775i65G Motherboard...
  • Seite 22 Motherboards! Permanente Beschädigung könnte die Folge sein! Das Power Management für USB 2.0 arbeitet unter Microsoft ® Windows ® ® ® XP SP1 oder SP2/2000 SP4 einwandfrei. Unter Microsoft Windows ME könnte es dagegen zu Störungen kommen. ASRock 775i65G Motherboard...
  • Seite 23: Sicherheitshinweise Vor Der Montage

    Bevor Sie die 775-Pin CPU in den Sockel sitzen, prüfen Sie bitte, ob die CPU-Oberfläche sauber ist und keine der Kontakte verbogen sind. Setzen Sie die CPU nicht mit Gewalt in den Sockel, dies kann die CPU schwer beschädigen. ASRock 775i65G Motherboard...
  • Seite 24 775-Pin Sockel 775-Pin CPU Um die CPU ordnungsgemäß einsetzen zu können, richten Sie die zwei Orientierungskerben der CPU mit den beiden Markierungen des Sockels aus. Schritt 2-3. Drücken Sie die CPU vorsichtig in vertikaler Richtung in den Sockel. ASRock 775i65G Motherboard...
  • Seite 25 Schritt 4. Sockel schließen: Schritt 4-1. Drehen Sie die Ladeplatte auf den Kühlkörper (IHS). Schritt 4-2. Drücken Sie leicht auf die Ladeplatte und schließen Sie den Ladehebel. Schritt 4-3. Sichern Sie Ladehebel und Ladeplatte mithilfe des Hebelverschlusses. ASRock 775i65G Motherboard...
  • Seite 26: Installation Des Cpu-Lüfters Und Kühlkörpers

    Uhrzeigersinn zu drehen, wird der Kühlkörper nicht ordnungsgemäß am Motherboard befestigt. Schritt 5. Schließen Sie den Lüfter an den CPU- Lüfteranschluss des Motherboards. Schritt 6. Befestigen Sie überschüssiges Kabel mit Band, um eine Störung des Lüfters oder Kontakt mit anderen Teilen zu vermeiden. ASRock 775i65G Motherboard...
  • Seite 27: Installation Der Speichermodule (Dimm)

    2.3 Installation der Speichermodule (DIMM) 2.3 Installation der Speichermodule (DIMM) 2.3 Installation der Speichermodule (DIMM) Das 775i65G Motherboard bietet zwei 184polige DDR (Double Data Rate) DIMM- Steckplätze und unterstützt Zweikanal-Speichertechnologie. Es müssen immer zwei identische Speichermodule (selbe Marke, Geschwindigkeit, Größe und Chip- Art) in den DDR DIMM-Steckplätzen installiert werden, um die Zweikanal-...
  • Seite 28: Einbau Einer Erweiterungskarte

    2.4 Er 2.4 Er weiterungssteckplätze: (PCI-, A -, und AMR -Slots): Es stehen 3 PCI-, 1 AGP-, und 1 AMR-Slot auf dem 775i65G Motherboard zur Verfügung. PCI-Slots: PCI-Slots werden zur Installation von Erweiterungskarten mit dem 32bit PCI-Interface genutzt. AGP-Slot: Der AGP-Steckplatz dient zur Installation einer Grafikkarte. Der ASRock AGP-Steckplatz hat speziell entwickelte Klammern, die die eingefügte Grafikkarte sicher festhalten.
  • Seite 29: Einstellung Der Jumper

    Systeminformationen wie Systemkennwort, Datum, Zeit und System-Setupeinstellungen. Um die Einstellungen zu löschen und Default-Werte wiederherzustellen, schalten Sie den Computer aus, ziehen Sie den Netzstecker und überbrücken Sie 2-pin von CLRCMOS0 mithilfe des Jumpers für 5 Sekunden. ASRock 775i65G Motherboard...
  • Seite 30: Integrierte Header Und Anschlüsse

    (IDE1, blau) und das CD-ROM mit dem sekundären IDE-Anschluss (IDE2, schwarz). Seriell-ATA-Anschlüsse Diese beiden Serial ATA- (SATA-)Verbínder (SATA1: siehe S.2 - No. 12) SATA2 unterstützten SATA-Datenkabel (SATA2: siehe S.2 - No. 11) für interne SATA1 Massenspeichergeräte. Die aktuelle SATA-Schnittstelle ermöglicht eine Datenübertragungsrate bis 1,5 Gb/s. ASRock 775i65G Motherboard...
  • Seite 31 (siehe S.2 - No. 29) Verwendung der vorderseitigen USB-Anschlüsse durch Verbinden des vorseitigen USB- Kabels mit diesem Header (USB4_5) werden die USB- Anschlüsse 4,5 auf ASRock I/O Plus™ nicht funktionieren. Anschluss für Dieser Anschluss unterstützt Infrarot-Modul einen optionalen Infrarot- Sender/Empfänger.
  • Seite 32 Anschluss und passen Sie den (siehe S.2 - No. 13) schwarzen Draht dem Erdungsstift an. CPU-Lüfteranschluss Verbinden Sie das CPU - Lüfterkabel mit diesem (4-pin CPU_FAN1) Anschluss und passen Sie den (siehe S.2 - No. 6) schwarzen Draht dem Erdungsstift an. ASRock 775i65G Motherboard...
  • Seite 33 (siehe S.2 - No. 2) damit ausreichend Strom geliefert werden kann. Andernfalls reicht der Strom nicht aus, das System zu starten. COM-Anschluss-Header Dieser COM-Anschluss- Header wird verwendet, um (9-pin COM1) ein COM-Anschlussmodul zu (siehe S.2 - No. 20) unterstützen. ASRock 775i65G Motherboard...
  • Seite 34 Anschließend werden die mit Ihrem System kompatiblen Treiber automatisch erkannt und auf dem Bildschirm angezeigt. Zur Installation der nötigen Treiber gehen Sie bitte der Reihe nach von oben nach unten vor. Nur so können die von Ihnen installierten Treiber richtig arbeiten. ASRock 775i65G Motherboard...
  • Seite 35: Entkoppelte Übertaktungstechnologie

    ASSETUP.EXE im BIN-Verzeichnis der Support-CD, um die Menüs aufzurufen. Das Setup-Programm soll es Ihnen so leicht wie möglich machen. Es ist menügesteuert, d.h. Sie können in den verschiedenen Untermenüs Ihre Auswahl treffen und die Programme werden dann automatisch installiert. ASRock 775i65G Motherboard...
  • Seite 36 1. Introduction 1. Introduction Merci pour votre achat d’une carte mère ASRock 775i65G, une carte mère très fiable produite selon les critères de qualité rigoureux de ASRock. Elle offre des perfor- mances excellentes et une conception robuste conformément à l’engagement d’ASRock sur la qualité...
  • Seite 37: Spécifications

    - Max. 2Go L’accélérateur - Contrôle direct de la fréquence CPU (voir ATTENTION 6) hybride - ASRock U-COP (voir ATTENTION 7) - Garde d’échec au démarrage (B.F.G.) Slot d’extension - 3 x slots PCI - 1 x slot AGP, support des cartes AGP 1.5V, 8X / 4X...
  • Seite 38 - Tachéomètre ventilateur CPU - Tachéomètre ventilateur châssis - Ventilateur silencieux d’unité centrale - Monitoring de la tension: +12V, +5V, +3.3V, Vcore - Microsoft ® Windows ® 98SE / ME / 2000 / XP Certifications - FCC, CE, WHQL ASRock 775i65G Motherboard...
  • Seite 39 Cela pourrait l’endommager de manière définitive! La gestion de l’alimentation pour l’USB 2.0 fonctionne bien sous Microsoft ® Windows ® XP SP1; SP2/2000 SP4. Elle peut ne pas fonctionner correctement sous Microsoft ® Windows ® 98/ME. ASRock 775i65G Motherboard...
  • Seite 40 Sinon, le processeur sera gravement endommagé. Etape 1. Ouvrez le socle : Etape 1-1. Dégagez le levier en appuyant sur le crochet et en le faisant ressortir pour dégager la languette de retenue. ASRock 775i65G Motherboard...
  • Seite 41 De l’index et du de votre main gauche, soutenez le bord de la plaque de chargement, engagez le PnP avec le pouce de votre main droite, et enlevez le capuchon du socle tout en appuyant sur le centre du capuchon PnP pour vous aider. ASRock 775i65G Motherboard...
  • Seite 42 (Enfoncez (4 endroits)) Etape 4. Faites tourner les attaches dans le sens des aiguilles d’une montre, puis, du pouce, enfoncez les capuchons des attaches pour les installer et les verrouiller. Répétez l’opération avec les autres attaches. ASRock 775i65G Motherboard...
  • Seite 43 2.3 Installation des modules mémoire (DIMM) 2.3 Installation des modules mémoire (DIMM) La carte mère 775i65G possède deux emplacements DIMM DDR (Double Débit de données) 184 broches, et prend en charge la technologie Dual Channel Memory. Pour la configuration Double canal, vous devez toujours installer deux modules de mémoire identiques (mêmes marque, vitesse, dimensions et type de chip) dans les...
  • Seite 44 2.4 Slot d’extension (Slots PCI, AGP, et AMR) 2.4 Slot d’extension (Slots PCI, AGP, et AMR) IIl y a 3 slots PCI, 1 slot AGP, et 1 slot AMR sur les cartes mères 775i65G. Slots PCI: Les slots PCI sont utilisés pour installer des cartes d’extension dotées d’une interface PCI 32 bits.
  • Seite 45 Pour effacer et réinitialiser les paramètres du système à leur configuration par défaut, veuillez mettre l’ordinateur hors tension et débrancher le cordon d’alimentation, puis utilisez un capuchon de cavalier pour court-circuiter la 2 broches sur CLRCMOS0 pendant 5 secondes. ASRock 775i65G Motherboard...
  • Seite 46 ATA (SATA) prennent en (SATA1: voir p.2 No. 12) SATA2 charge les câbles SATA pour (SATA2: voir p.2 No. 11) les périphériques de stockage SATA1 internes. L’interface SATA actuelle permet des taux transferts de données pouvant aller jusqu’à 1,5 Go/s. ASRock 775i65G Motherboard...
  • Seite 47 En-tête USB 2.0 partagé Cet en-tête USB4_5 est partagé avec les ports USB 2.0 (USB4_5 br.9) 4 et 5 sur ASRock I/O Plus™. (voir p.2 No. 29) Lorsque vous utilisez les ports USB du panneau frontal en connectant le câble USB du panneau frontal à...
  • Seite 48 (voir p.2 No. 13) Connecteur du ventilateur Veuillez connecter le câble de de l’UC ventilateur d’UC sur ce connecteur et brancher le fil (CPU_FAN1 br. 4) noir sur la broche de terre. (voir p.2 No. 6) ASRock 775i65G Motherboard...
  • Seite 49 Faute de quoi, il ne sera pas possible de mettre sous tension. En-tête de port COM Cette en-tête de port COM est utilisée pour prendre en charge (COM1 br.9) un module de port COM. (voir p.2 No. 20) ASRock 775i65G Motherboard...
  • Seite 50 être détectés automatiquement et sont listés sur la page du pilote du CD. Veuillez suivre l’ordre de haut en bas sur le côté pour installer les pilotes requis. En conséquence, les pilotes que vous installez peuvent fonctionner correctement. ASRock 775i65G Motherboard...
  • Seite 51 Pour utiliser le CD technique, insérez-le dans le lecteur de CD-ROM. Le Menu principal s’affiche automatiquement si “AUTORUN” est activé dans votre ordinateur. Si le Menu principal n’apparaît pas automatiquement, localisez dans le CD technique le fichier “ASSETUP.EXE” dans le dossier BIN et double-cliquez dessus pour afficher les menus. ASRock 775i65G Motherboard...
  • Seite 52: Contenuto Della Confezione

    Grazie per aver scelto una scheda madre ASRock 775i65G, una scheda madre affidabile prodotta secondo i severi criteri di qualità ASRock. Le prestazioni eccellenti e il design robusto si conformano all’impegno di ASRock nella ricerca della qualità e della resistenza.
  • Seite 53 - Supporta DDR400/333/266 (vedi ATTENZIONE 5) - Max. 2GB Booster ibrido - Stepless control per frequenza del processore (vedi ATTENZIONE 6) - ASRock U-COP (vedi ATTENZIONE 7) - Boot Failure Guard (B.F.G.) Slot di - 3 x slot PCI espansione - 1 x slot AGP, supporta scheda AGP a 1.5V, modelli 8X / 4X...
  • Seite 54 La procedura è eseguita a proprio rischio ed a proprie spese. Noi non possiamo essere ritenuti responsabili per possibili danni provocati dall’overclocking. ASRock 775i65G Motherboard...
  • Seite 55 NON usare schede AGP da 3,3 V nello slot AGP di questa motherboard! Ciò potrebbe provocare danni permanenti! ® La Gestione Risorse per USB 2.0 funziona perfettamente con Microsoft ® Windows XP SP1; SP2/2000 SP4. Potrebbe dare qualche problema con ® ® Microsoft Windows 98/ME. ASRock 775i65G Motherboard...
  • Seite 56: Installazione

    5. Nell’usare i giraviti per fissare la scheda madre al telaio non serrare eccessivamente le viti! Altrimenti si rischia di danneggiare la scheda madre. ASRock 775i65G Motherboard...
  • Seite 57 Fase 1-2. Ruotare di circa 135 gradi la leva di carico per aprirla completamente. Fase 1-3. Ruotare di circa 100 gradi la piastra di carico per aprirla completamente. Fase 2. Inserire la CPU 775-Pin: Fase 2-1. Tenere la CPU dai bordi segnati con linee nere. ASRock 775i65G Motherboard...
  • Seite 58 2. Questo tappo deve essere inserito se se la scheda madre deve essere restituita per l’assistenza. Fase 4. Chiudere la presa: Fase 4-1. Ruotare la piastra di carico sull’IHS. Fase 4-2. Bloccare la leva di carico mentre si preme leggermente sulla piastra di carico. ASRock 775i65G Motherboard...
  • Seite 59 CPU sulla scheda madre. Fase 6. fissare il cavo in eccesso con fascette per assicurare che il cavo non interferisca con il funzionamento della ventola o che venga a contatto con gli altri componenti. ASRock 775i65G Motherboard...
  • Seite 60 2.3 Installazione dei moduli di memoria (DIMM) 2.3 Installazione dei moduli di memoria (DIMM) La motherboard 775i65G dispone di due slot DIMM DDR (Double Data Rate) a 184 pin e supporta la tecnologia Dual Channel Memory. Per attivare la configurazione Dual Channel Memory bisogna installare sempre due moduli di memoria identici (stessa marca, velocità, dimensioni e tipo di chip) negli slot DIMM.
  • Seite 61 2.4 Slot di espansione (Slot PCI, Slot AGP, e Slot AMR) 2.4 Slot di espansione (Slot PCI, Slot AGP, e Slot AMR) Esistono 3 slot PCI, 1 slot AGP, e 1 slot AMR su entrambe le schede madri 775i65G. Slot PCI: Sono utilizzati per installare schede di espansione con Interfaccia PCI a 32-bit.
  • Seite 62 Per azzerare e ripristinare i parametri di sistema all’impostazione predefinita, spegnere il computer e scollegare il cavo d’alimentazione: utilizzare un cappuccio jumper per cortocircuitare i 2 pin su CLRCMOS0 per 5 secondi. ASRock 775i65G Motherboard...
  • Seite 63 (SATA1: vedi p.2 Nr. 12) SATA2 SATA per dispositivi di (SATA2: vedi p.2 Nr. 11) immagazzinamento interni. SATA1 ATA (SATA) supportano cavi SATA per dispositivi di memoria interni. L’interfaccia SATA attuale permette velocità di trasferimento dati fino a 1.5 Gb/s. ASRock 775i65G Motherboard...
  • Seite 64 USB 2.0 aggiuntive. Collettore USB 2.0 Questo collettore USB4_5 è condiviso condiviso con le porte USB 2.0 4 e 5 su ASRock I/O Plus™. (9-pin USB4_5) Quando si utilizzano le porte (vedi p.2 Nr. 29) USB del pannello frontale,...
  • Seite 65 (vedi p.2 Nr. 13) terra. Connettore ventolina CPU Collegare il cavo della ventolina CPU a questo connettore e far (4-pin CPU_FAN1) combaciare il filo nero al pin (vedi p.2 Nr. 6) terra. ASRock 775i65G Motherboard...
  • Seite 66 (vedi p.2 Nr. 2) in modo che possa fornire energia sufficiente. In caso contrario l’unità non si avvia. Collettore porta COM Questo collettore porta COM è utilizzato per supportare il (9-pin COM1) modulo porta COM. (voir p.2 Nr. 20) ASRock 775i65G Motherboard...
  • Seite 67 Quindi, i driver compatibili con il sistema vengono rilevati automaticamente ed elencati nella pagina del driver del CD in dotazione. Per l’installazione dei driver necessari, procedere in base ad un ordine dall’alto verso il basso. In tal modo, i driver installati funzioneranno correttamente. ASRock 775i65G Motherboard...
  • Seite 68 Inserire il CD di supporto nel lettore CD-ROM. Se la funzione “AUTORUN” è attivata nel computer, apparirà automaticamente il Menù principale. Se il Menù principale non appare automaticamente, posizionarsi sul file “ASSETUP.EXE” nel CESTINO del CD di supporto e cliccare due volte per visualizzare i menù. ASRock 775i65G Motherboard...
  • Seite 69: Contenido De La Caja

    1. Introducción 1. Introducción Gracias por su compra de ASRock 775i65G placa madre, una placa de confianza producida bajo el control de calidad estricto y persistente. La placa madre provee realización excelente con un diseño robusto conforme al compromiso de calidad y resistencia de ASRock.
  • Seite 70 - Soporta DDR400/333/266 (vea ATENCIÓN 5) - Max. 2GB Amplificador - Stepless control de frecuencia de CPU (vea ATENCIÓN 6) Híbrido - ASRock U-COP (vea ATENCIÓN 7) - Protección de Falla de Inicio (B.F.G..) Ranuras de - 3 x ranuras PCI Expansión - 1 x slot AGP, soporta tarjeta AGP de 1.5V, 8X / 4X...
  • Seite 71 - Taquímetros de los ventiladores del procesador y del chasis - Ventilador silencioso para procesador - Monitor de Voltaje: +12V, +5V, +3.3V, Vcore ® ® - En conformidad con Microsoft Windows 98SE / ME / 2000 / XP Certificaciones - FCC, CE, WHQL ASRock 775i65G Motherboard...
  • Seite 72 NO utilice una tarjeta AGP de 3,3V AGP en la ranura AGP de esta placa base. Podría causar daños permanentes. ® Power Management para USB 2.0 funciona bien bajo Microsoft ® Windows XP SP1; SP2/2000 SP4. Es posible que no funcione ® ® propiamente bajo Microsoft Windows 98/ME. ASRock 775i65G Motherboard...
  • Seite 73: Instalación

    2.1 Instalación de Procesador 2.1 Instalación de Procesador Para la instalación de la CPU Intel de (Placa de carga) (Cuerpo del socket) 775 agujas, siga los siguientes pasos. (Matriz de contacto) Introducción al socket de 775 agujas ASRock 775i65G Motherboard...
  • Seite 74 Tecla de alineación Muesca de Muesca de orientación orientación Socket de 775 agujas CPU de 775 agujas Para insertarla correctamente, asegúrese de que las dos muescas de orientación de la CPU coinciden con las teclas de alineación del socket. ASRock 775i65G Motherboard...
  • Seite 75 A continuación se ofrece un ejemplo para ilustrar la instalación del disipador para la CPU de 775 agujas. (Aplique el material termal de interfaz) Paso 1. Aplique el material termal de interfaz en el centro del IHS de la superficie del socket. ASRock 775i65G Motherboard...
  • Seite 76 CPU en la placa madre. Paso 6. Fije el cable que sobre con un lazo para asegurarse de que el cable no interfiere en el funcionamiento del ventilador y tampoco entra en contacto con otros componentes. ASRock 775i65G Motherboard...
  • Seite 77 2.3 Instalación de Memoria 2.3 Instalación de Memoria La placa base 775i65G proporciona dos ranuras DIMM DDR (Double Data Rate, es decir, Tasa doble de datos) de 184 contactos y es compatible con la Tecnología de memoria de canal dual. Para la configuración de canal dual, siempre es necesario instalar dos módulos de memoria idénticos (la misma marca, velocidad, tamaño y...
  • Seite 78 775i65G. Ranura PCI: Para instalar tarjetas de expansión que tienen 32-bit Interface PCI. Ranura AGP: Para instalar trajeta gráfica. La ranura AGP ASRock tiene un diseño especial de seguro para fijar con seguridad la tarjeta gráfica introducida. NO utilice una tarjeta AGP de 3,3V AGP en la ranura AGP de esta placa base.
  • Seite 79 A continuación, utilice una cubierta de jumper para aislar las agujas 2 pins en CLRCMOS0 du- rante 5 segundos. ASRock 775i65G Motherboard...
  • Seite 80 SATA1 interfaz SATA actual permite una velocidad de transferencia de 1.5 Gb/s. Cable de datos de Ambos extremos del cable serie ATA (SATA) pueden conectarse al disco duro SATA o la conexión de la (Opcional) placa base. ASRock 775i65G Motherboard...
  • Seite 81 USB del panel (ver p.2, N. 29) frontal conectando el cable USB del panel frontal a este cabezal (USB4_5), los puertos USB 4 y 5 en el ASRock I/O Plus no funcionarán. Conector de módulo Infrared Soporta módulo Infrared de transmisión y recepción...
  • Seite 82 Si pretende enchufar el ventilador de procesador de 3 contactos en el conector del ventilador de procesador de esta placa base, conéctelo al contacto 1-3. Contacto 1-3 conectado Instalación del ventilador de 3 contactos ASRock 775i65G Motherboard...
  • Seite 83 ATX 12V, de modo que proporcione suficiente electricidad. De lo contrario no se podrá encender. Cabezal del puerto COM Este cabezal del puerto COM se utiliza para admitir un (9-pin COM1) módulo de puerto COM. (vea p.2, N. 20) ASRock 775i65G Motherboard...
  • Seite 84 óptica. A continuación, se detectarán automáticamente los controladores compatibles con el sistema y se mostrarán en la página de controladores de CD compatibles. Siga el orden de arriba a abajo para instalar los controladores requeridos. Los controladores que instale pueden funcionar correctamente. ASRock 775i65G Motherboard...
  • Seite 85 Para iniciar la instalación, ponga el CD en el lector de CD y se desplegará el Menú Principal automáticamente si «AUTORUN» está habilitado en su computadora. Si el Menú Principal no aparece automáticamente, localice y doble-pulse en el archivo “ASSETUP.EXE” para iniciar la instalación. ASRock 775i65G Motherboard...

Inhaltsverzeichnis