Dvi Connector - ASROCK 775XFire-RAID Bedienungsanleitung

ss Slot
re TM Edition
TM
e Edition
1, Pin2
All manuals and user guides at all-guides.com
Step 3. Install the standard Radeon (CrossFire
press slot (PCI Express x 4). For the proper installation procedures, please
refer to section "Expansion Slots".
Standard Radeon
(CrossFire TM Ready)
graphics card
Step 4. Install the Radeon CrossFire
slot. For the proper installation procedures, please refer to section "Expan-
sion Slots".
Radeon CrossFire TM
Edition graphics card
Standard Radeon
TM
(CrossFire Ready)
graphics card
You are allowed to install two CrossFire
or you may use one CrossFire
standard Radeon (CrossFire
Step 5. Correctly connect the DVI-DMS cable to the monitor connector and two
graphics cards that you install. (If you install two standard Radeon
(CrossFire TM Ready) graphics cards to this motherboard, please skip this
step.)
DVI-DMS cable
Connect the DVI-DMS
cable to DVI connector of
the compatible standard
TM
Radeon (CrossFire
Ready) graphics card.
ASRock 775XFire-RAID Motherboard
TM Ready) graphics card to AGI Ex-
TM
Edition graphics card to PCI Express x 16
TM Edition graphics cards to both slots,
TM Edition graphics cards and a compatible
TM
Ready) graphics card from the same series.

DVI connector

DMS connector
TM
Standard Radeon (CrossFire Ready)
graphics card
DVI connector
There are two DVI connectors on the
standard Radeon (CrossFire TM
graphics card. Please connect the DVI-DMS
cable to the correct DVI connector; otherwise
, the graphics card will not work.
Ready)
1 7 1 7 1 7 1 7 1 7