Subwoofer - Yamaha VME 8013 RX-A3070 Bedienungsanleitung

[RX-A2070]
(1 kHz, 0,9% THD, 6 Ω)
Front L/R .........................................................................190 W/Kan.
Center .............................................................................190 W/Kan.
Surround L/R ..................................................................190 W/Kan.
Surround Back L/R .........................................................190 W/Kan.
Front Presence L/R.........................................................190 W/Kan.
(1 kHz, 0,9% THD, 8 Ω)
Front L/R .........................................................................175 W/Kan.
Center .............................................................................175 W/Kan.
Surround L/R ..................................................................175 W/Kan.
Surround Back L/R .........................................................175 W/Kan.
Front Presence L/R.........................................................175 W/Kan.
(1 kHz, 0,9% THD, 4 Ω)
Front L/R [Großbritannien-, Europa- und Russland-Modelle]
.........................................................................................220 W/Kan.
• Nennausgangsleistung (1 Kanal betrieben)
[RX-A3070]
(1 kHz, 10% THD, 6 Ω)
Front L/R .........................................................................230 W/Kan.
Center .............................................................................230 W/Kan.
Surround L/R ..................................................................230 W/Kan.
Surround Back L/R .........................................................230 W/Kan.
Front Presence L/R.........................................................230 W/Kan.
(1 kHz, 10% THD, 8 Ω)
Front L/R .........................................................................230 W/Kan.
Center .............................................................................230 W/Kan.
Surround L/R ..................................................................230 W/Kan.
Surround Back L/R .........................................................230 W/Kan.
Front Presence L/R.........................................................230 W/Kan.
[RX-A2070]
(1 kHz, 10% THD, 6 Ω)
Front L/R ........................................................................ 220 W/Kan.
Center............................................................................. 220 W/Kan.
Surround L/R.................................................................. 220 W/Kan.
Surround Back L/R......................................................... 220 W/Kan.
Front Presence L/R ........................................................ 220 W/Kan.
(1 kHz, 10% THD, 8 Ω)
Front L/R ........................................................................ 220 W/Kan.
Center............................................................................. 220 W/Kan.
Surround L/R.................................................................. 220 W/Kan.
Surround Back L/R......................................................... 220 W/Kan.
Front Presence L/R ........................................................ 220 W/Kan.
• Dynamikleistung (IHF)
[RX-A3070]
Front L/R (8/6/4/2 Ω) ........................................ 175/220/295/410 W
[RX-A2070]
Front L/R (8/6/4/2 Ω) ........................................ 165/210/285/405 W
• Dämpfungsfaktor
Front L/R, 1 kHz, 8 Ω ....................................................150 oder mehr
• Eingangsempfindlichkeit/Eingangsimpedanz
PHONO (1 kHz, 100 W/8 Ω) ............................................ 3,5 mV/47 kΩ
AUDIO 2 usw. (1 kHz, 100 W/8 Ω).................................. 200 mV/47 kΩ
• Maximales Eingangssignal
PHONO (1 kHz; 0,5% THD) .......................................45 mV oder mehr
AUDIO 2 usw. (1 kHz; 0,5% THD) ............................... 2,4 V oder mehr
• Ausgangsnennpegel / Ausgangsimpedanz
PRE OUT
SUBWOOFER (50 Hz)...................................................... 1,0 V/470 Ω
Außer SUBWOOFER (1 kHz)........................................... 1,0 V/470 Ω
ZONE OUT ......................................................................... 1,0 V/470 Ω
• Maximaler Ausgangspegel
PRE OUT/ZONE OUT ................................................. 2,0 V oder mehr
• Kopfhörerimpedanz .................................................. 16 Ω oder mehr
• Frequenzgang
AUDIO 2 usw. (10 Hz bis 100 kHz) .......................................... +0/-3 dB
• Abweichung von der RIAA-Entzerrung
PHONO (20 Hz bis 20 kHz) .....................................................0±0,5 dB
196
De
• Klirrfaktor (Total Harmonic Distortion)
[RX-A3070]
PHONO an PreOut (1 kHz, 1 V).........................0,04% oder weniger
AUDIO 2 usw. an Speaker Out (20 Hz bis 20 kHz, 75 W/8 Ω)
..........................................................................0,04% oder weniger
[RX-A2070]
PHONO an PreOut (1 kHz, 1 V).........................0,04% oder weniger
AUDIO 2 usw. an Speaker Out (20 Hz bis 20 kHz, 70 W/8 Ω)
..........................................................................0,04% oder weniger
• Signal-Rauschabstand (IHF-A-Schaltung)
(Pure Direct, Eingang 1 kΩ kurzgeschlossen, Lautsprecher-Ausgang)
PHONO...................................................................... 95 dB oder mehr
AUDIO 2 usw. .......................................................... 110 dB oder mehr
• Eigenrauschen (IHF-A-Schaltung)
Lautsprecher-Ausgang.......................................150 μV oder weniger
• Kanaltrennung
(Eingang 1 kΩ kurzgeschlossen, 1 kHz/10 kHz)
PHONO........................................................... 75 dB/60 dB oder mehr
AUDIO 2 usw. ................................................. 75 dB/60 dB oder mehr
• Lautstärkeregelung
Hauptzone ........MUTE, -80 dB bis +16,5 dB (in Schritten von 0,5 dB)
Zone2/Zone3 ....MUTE, -80 dB bis +16,5 dB (in Schritten von 0,5 dB)
• Klangregelungscharakteristik
Hauptzone
Bassanhebung/-absenkung
...........................................±6,0 dB/50 Hz (in Schritten von 0,5 dB)
Tiefen-Übernahmefrequenz..................................................350 Hz
Höhenanhebung/-absenkung
......................................... ±6,0 dB/20 kHz (in Schritten von 0,5 dB)
Höhen-Übernahmefrequenz ................................................3,5 kHz
Zone2/Zone3
Bassanhebung/-absenkung
...........................................±6,0 dB/50 Hz (in Schritten von 0,5 dB)
Tiefen-Übernahmefrequenz..................................................350 Hz
Höhenanhebung/-absenkung
......................................... ±6,0 dB/20 kHz (in Schritten von 0,5 dB)
Höhen-Übernahmefrequenz ................................................3,5 kHz