Scale Mounting - Sony BL55-RE Bedienungsanleitung

3-3. Scale Mounting

1
Check that there is no dust or other foreign substances on the mounting surface, and mount the reference
plate parallel to the machine guide as shown in the figure. (Fastening torque: 1.4 N . m)
The reference hole is located on the left, as shown in the figure. Adjust at the right side while observing
the parallelism with the lever type dial gauge.
n
The scale is pressed against the reference plate for parallelism when mounting. The reference plate is vital to
accurate scale mounting. Be sure to always use the supplied screw and mount it exactly as described in the
specifications.
BL55-006RE, 026RE, 046RE, 066RE, 086RE, 106RE
M4 x 8
Plain washer
(nominal 4)
Reference abutment surface
3-4
(E)
+0.05
Reference Ø4
0
Fig. 3-3
Fig. 3-4
0.01(0.00039) M
Note: "M" refers to the machine guide.
BL55-016RE, 036RE, 056RE, 076RE, 096RE
M4 x 8
Plain washer
(nominal 4)
Reference abutment surface
BL55-RE