Detector Head Mounting - Sony BL55-RE Bedienungsanleitung

3-4. Detector Head Mounting

1
Move the machine table and adjust the mounting position of the detector head to roughly the center of
the scale.
2
Use the supplied mounting screws to semi-tighten the detector head.
Detector head
3
Remove the stopper from the detector head.
3-8
(E)
Detector head mounting screw
(M4 x 10 hex. socket-head cap screw)
Scale
Scale clamp
Reference
plate
Fig. 3-11
Stopper
Fig. 3-12
Plain washer (nominal 4)
Detector head
Scale
BL55-RE