Intended Use; Before First Use; Working Principle - Westfalia 32 49 62 Bedienungsanleitung

Intended Use

The compressed air spray gun is suitable for application of underbody coating
and stoneguard underbody compound, cold cleaning solvent, etc. from regular
disposable cans. It is also suitable for spraying other thin liquid material such
as oil, coolant, cavity sealing, etc. from appropriate screw-on cans.
The intended use also includes an operation following the operating instruc-
tions.
Any use beyond these parameters (different media, applying force) or any
changes (reconstruction, no original accessory) can lead to serious risks and
is regarded as use that is contrary to the intended purpose.

Before first Use

Unpack the air spray gun and the accessory and check all parts for any damage
in transit. Dispose of packaging materials or store them out of reach of children.
Plastic bags etc. may become a deadly toy for children.

Working Principle

The compressed air spray gun operates on the suction principle. Therefore the
material container is not under pressure. The compressed air, which delivers the
spraying material, is connected to the air inlet and is lead through the gun body.
The air passes the nozzle when pressing the trigger. An underpressure is
generated by the high air flow speed. As a result, the spraying material is drawn
and delivered through the spraying tube and atomised at the same time.
Using
1. Before starting to work, check the trigger (4) and make
sure it moves freely.
2. Insert the suction tube (3) into the material can to be
processed. Firmly screw the can to the screw connection
of the spray gun.
3. Connect the quick coupling connector (6) of the air spray
gun to the compressed air supply. The air should be
regulated and filtered. Setup the air pressure according
to the parameters supplied with the material to be proc-
essed and according to the technical data.
Using
11