Changing The Illuminant - Westfalia 62 33 55 Bedienungsanleitung

1
2 3
1. The spotlight must be turned OFF and the charging cable should be pulled
from the charging Socket (8).
2. Remove the protective rubber ring (1) from the spotlight.
3. Then, remove the two screws (2) with a Phillips screwdriver.
4. Remove the reflector (4) and disconnect the power cables to the defective
halogen Bulb. Compress the bracket as indicated by the arrows and flip
them up. Remove the defective bulb and replace it with one of the same
type and dimensions (see the technical data and the type label). Do not
touch the bulb and the reflector with your bare fingers. Use a piece of
clean cloth or similar (handkerchief).
5. Assemble the spotlight in the reverse procedure. If the lamp does not
function normally after that, have it checked by a professional.
The bulb of the emergency light can be replaced by loosening the screw (3)
above the light and removing the clear cover. Use a bulb of the same type and
dimensions (12 V DC / 3 W).

Changing the Illuminant

4
8