Start-Up And Operation; Charging The Lead Acid Battery; Features (Halogen Lights, Emergency Light, 12 V Socket) - Westfalia 62 33 55 Bedienungsanleitung

With the lugs (5) the included shoulder strap can be attached. This way, you
can conveniently carry the spotlight with you.
Charging the Lead-Acid Battery
Place the spotlight on a firm and even surface.
Now charge the battery (sealed lead-acid battery) of the spotlight. Plug the
charger into a 230 V AC wall socket or plug the 12 V DC plug into a 12 V DC
cigarette lighter socket. You can also use a similar 12 V DC socket. Plug the
other end of the charging cord into the charging socket (8).
The red control LED above the charging socket (8) indicates that the
charging process has started.
Attention! Charge the Battery only while the spotlight is turned off!
The charging time is approx. 10 - 12 hours.
Features
Halogen Lights
On the back of the spotlight is the toggle switch (6) for one or two bulb
operation. In the "0" position only one halogen bulb is turned on and in
position "1" both.
To turn on the spotlight, press the ON button (2).
Attention! Do not use the spotlight for more than 15 minutes continuously and
allow it to cool down sufficiently. The front lens can become very hot while the
lamp is used (Burn Hazard!).
Emergency Light
A small emergency light (3) equipped with a 12 V / 3 W bulb is located at the
front of the handle. Turn it ON or OFF by pressing the button under it.
12 V DC Socket
A 12 V Socket (4), from which up to 100 W can be drawn, is located under
the emergency light (3).
Attention! Do not use the socket while charging!

Start-Up and Operation

6