Start-Up And Operation; Technical Data - Westfalia 19 62 79 Bedienungsanleitung

After unpacking the lamp, remove the screws (5) at the sides of the unit and
snap on the support (4). Replace the screws and tighten them.
Make sure the switch (7) set to OFF.
Place the lamp on an even, solid surface.
Connect the power cord (3) directly to the 12 V socket of your car or a similar
12 V / DC – socket.
Set the power switch (7) to ON.
Please keep in mind that energy - saving illuminants require up to several
minutes to reach their full light output.

Technical Data:

Rated Voltage:
Rated Current:
Illuminant:

Start-Up and Operation

12 V / DC
1250 mA
Energy Saving Illuminant 15 W / E27 / 220 - 240 V /
50 Hz / AC
5