Starting A Car With A Dead Battery - Westfalia Lithium-Polymer Bedienungsanleitung

Starting a Car with a Dead Battery

Connect the unit as described above and turn it on. Press and hold the Jump
Start and Light / S.O.S buttons simultaneously for 3 sec.
Please ensure the polarity is connected correctly before pressing both buttons
as serious damage may occur to the device and/or the vehicle's battery if
polarity is reversed.
The red S.O.S / JUMP START LED flashes.
Wait for a few moments and start the vehicle.
ATTENTION
3. Once the engine has successfully started press the power button to turn
off immediately.
4. Re-charge the device as soon as possible after use. This ensures
readiness for the next jump attempt and maximizes battery life. Make sure
it is fully re-charged before storage.
Operation
32