Using The Line Laser With Tripod - Westfalia 20 49 33 Bedienungsanleitung

Using the Line Laser with Tripod

The tripod provides a stable, height adjustable support.
1. Unfold the quick clamps (I) on the telescopic legs (G) and pull
out the legs to the desired length. Lock the quick clamps.
2. Press the struts (H) downwards in order to give the tripod more
stability.
3. Screw the quick change plate on the
head by using the tripod socket that is
situated in the shell of the plumb and
cross line laser.
4. Insert the quick change plate on the
tripod head (A). Lightly pull out the
coupling lever (B) and engage the
quick change plate with the coupling lever.
5. Align the plumb and cross line laser with the circular and the
tubular level (K und L). For rough adjustments, use the circular
level and for fine adjustments, use the tubular level.
6. With the horizontal locking screw (C) you can tilt the tripod head
accordingly. Unscrew the locking screw and turn it counter
clockwise. Tilt the tripod head to the desired position. Turn the
screw clockwise in order to re-tighten the screw.
7. With the swing arm (E) you can turn the tripod head to the
desired direction. To lock the tripod head, tighten the locking
screw (D).
8. With the crank (F) you can move the tripod head up and down.
Lift up the crank as far as it will go and turn it clockwise to lift up
the tripod head or turn counter clockwise to lower the head.
Tripod Overview
17
Quick Change Plate