Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Using
5. For fine adjustments, turn the height adjustment screw (1).
Order of operating modes:
Cross Line Operation (pressing the button once)
Place the plumb and cross line laser on a firm horizontal surface
and switch on the unit. The unit is in cross line operation and
produces a horizontal and a vertical laser line. The plumb bob
function is also switched on. The plumb down beams will be
projected on the ceiling and on the floor.
Horizontal Operation (pressing the button twice)
Press the button twice. The plumb and cross line laser is in
horizontal operating and produces a horizontal line.
Vertical Operation (pressing the button three times)
Press the button three times. The plumb and cross line laser is in
vertical operating and produces a vertical line.
Caution: Do not use the plumb can cross line laser when the unit is
locked in the lowest position (transport protection). In this position
the results will not be correct.
15
Werbung
Inhaltsverzeichnis
