Westfalia TM3030 Bedienungsanleitung Seite 45

Press the Menu button to return to the previous level e.g.
to normal display mode. After 65 seconds without pressing
a key, the unit will turn to the previous level automatically.
For all below mentioned setting mode you will have to
press the Menu button for approx. 3 seconds. Than
select the operating mode and press the OK button to
confirm.
PRO: Setting Mode – for setting the weekly program
Please read the chapter "Setting the weekly program"
(Auto Mode)
DAT: Setting Mode – for setting the Date and Time of
day
Turn the setting wheel to modify the settings and press
OK to confirm.
POS: Displaying Mode
For querying the actuator's current position. Displayed
values from 0 – 100 % are possible. This is only a
displaying mode and settings are not possible.
DST: Setting Mode – for summer and winter time
changeover
1. Turn the setting wheel clockwise or counter clockwise
until the display shows ON resp. OFF.
Additional Setting Modes
40