Mounting The Energy Saving Radiator Controller - Westfalia TM3030 Bedienungsanleitung

Mounting the Energy Saving Radiator Controller

To be able to mount the controller on the radiator heating
valve, the display must show INS. For some heating vales
you do not need an adapter. Adapters for Danfoss valves
(RA, RAV, RAVL) are included in delivery.
1. Attach the adapter on the valve and
turn until it fits securely.
2. For RAV adapter, the valve exten-
sion (13) must be attached to the
valve tappet.
3. Secure the RA and RAV adapters by
means of the enclosed bolt and nut.
4. Mount the radiator controller on the valve and tighten
the swivel nut.
5. After mounting the controller press the button OK to
start the adjustment run. The actuator will perform the
adjustment run so that it can adapt to the valve. During
this process, "ADA" will be displayed and a turning
symbol. During the adjustment run no operation is
Mounting
35
13