Removing The Old Thermostat Dial; Adapter Overview - Westfalia TM3030 Bedienungsanleitung

Removing the old Thermostat Dial

The actuator can be installed
on all standard heating valves.
There is no need to drain
away water or fiddle around
with the heating system before
doing this.
1. First, remove
thermostat dial. Turn the
thermostat
clockwise as far as it will go
(I).
2. Release the thermal ring of the thermostat (II and III).
Adapter Overview - Manufacturer
Heimeier, MNG, Junkers, Landis&Gyr „Duodyr",
Honeywell-Braukmann, Oventrop, Schlösser,
Comap, Simplex, Valf Sanayii, Mertik Maxitrol,
Watts, Wingenroth (Wiroflex), R.B.M., Tiemme,
Jaga
Danfoss RA included
Danfoss RAV included
Danfoss RAVL included
Dismounting
the old
dial counter
29
II.
Nor Adapter
required
I.
III.