Before first Use
Unpack the energy saving radiator controller and check it
for any damage in transit. Dispose of packaging materials
or store it out of reach of children. Plastic bags etc. may
become a deadly toy for children.
Intended Use
The energy saving radiator controller has been designed
for the purpose of controlling a standard heating appliance
valve. The radiator controller is not suitable for underfloor
heating. The radiator controller moves a valve, thereby
allowing the amount of heat flowing to the heating
appliance to be controlled. The controller is compatible
with all standard heating appliance valves.
Only operate the radiator controller indoors and protect it
from the effects of damp and dust, as well as solar
radiation and sources of radiant heat.
Inserting/replacing the Batteries
1. Open the battery compartment lid at the rear side of the
unit and insert 2 fresh batteries of the type LR6 (AA)
into the battery compartments, observing the right
polarity. The polarity symbols are marked inside the
battery compartment.
2. Slide the battery compartment lid back and click until it
fits into place.
New alkaline batteries have a life of approximately
three years. The battery symbol (
the batteries need to be replaced.
Assembling
28
) will indicate when