Werbung
14. Gear assembly
Fig. 32
Installation of the gear assembly
Install the gear assembly after setting the chassis body to the
fast forward mode.
Incidentally, check the gear assembly so
that it is in the fast forward mode.
()Turn the F arm (shown in Fig. 33) in the direction of the
arrow until it touches the point shown by arrow
©
on
the take-up arm.
The reel, the function gears and function
arm go into the mode shown in Fig. 34.
Function arm
Function gear (Rewind)
Function gear (Fast forward)
Take-up reel
Take-up arm
Fig. 33
Function arm
SSSA
|
Function gear (Rewind) Function gear
Supply reel
(Fast forward)
Take-up reel
Fig. 34
|_D-720(W, Fs)
@)r urn the take-up arm (shown in Fig. 33) in the direction of
the
arrow
until
the take-up
gear
and
reel
under-neath
separate from each other shown in the Fig. 35.
It can
be removed by
Take-up reel
Fig. 35
Piayback
AS control
spring
Fig. 36
(F ix the counter belt onto the reel (take-up side).
the take-up side as shown in the figure.
Werbung
