Werbung
Verfügbare Sprachen
Verfügbare Sprachen
if the AUTO OFF indicator lights and the|
.----
|The moisture has condensed inside the recorder.
function buttons do not function
="
+ Keep the power on and wait until the indicator goes off to indicate
that the moisture has evaporated.
e Never insert a video cassette when the AUTO OFF lamp is lit.
Moisture condensation
When the unit is moved directly from a cold place to a warm place,
detected
inside the unit. When
this lamp
is lit, the cassette
is
or when the unit is operated in a place with high humidity, moisture
automatically ejected, if it is inserted, and the unit does not func-
may condense inside the unit. If the tape runs in this condition, it
tion, even if any of the function button is pressed.
may adhere to the head drum or the tape guide and be damaged. To
e@When the unit is first moved to place in which it is subject to con-
prevent this possibility, the unit is equipped with a moisture detec-
densation, we recommend you to wait for about ten minutes and to
tor. The AUTO OFF lamp lights to indicate that moisture has been
turn the power on so that the moisture detector will operate.
If the tape suddenly stops and the function | =~",
:
Liye
m
age
buttons do nottunction
-
Eject the cassette, and take up the leader tape
manually (see pag
5). Reinsert the cassette and operate the recorder again.
If the recorder does not function, turn the recorder off and contact
lf the STAND
BY indicator remains lit and]
~-~ "=
a
Some
our nearest Sony
service facility.
the recorder does not operate even though
¥
y
y
the lamp of the function button pressed is
lit
_—J
if the cassette cannot be ejected
| _.»
| Turn the recorder off and contact your nearest Sony service facility.
Should you have a problem other than those mentioned as
tact the dealer from whom this unit was purchased, or your
above, check the following three items then the list of pro-
local authorized Sony service facility.
blems and corrective actions. If the difficulty persists, con-
1.
Check that the ac power cord is firmly connected to a working ac outlet.
2.
Check that the POWER switch is set to ON.
3.
Check the connections:
see pages 14 and 15.
Problem
Corrective action
@ls the cassette correctly inserted? (See page 5.)
A CASS ee Cannel De: IFSGNEe:
® Check whether another cassette has already been inserted.
The tape does not run when the
function button is pressed
eCheck that the TIMER switch is set to the position other than REC.
@ Check that the REC lamp is lit.
®@ Check that the red button on the bottom of the cassette is in place. (See page 5.)
@Set the INPUT SELECT switch correctly.
Recording cannot be done.
@ Adjust the audio recording level. (See page 16.)
@ Prepare the program to be recorded. (See page 16.)
eSet the PROGRAMMED
OPERATION
switch to OFF.
eCheck that the TIMER switch is set to the proper position.
eCheck that the SYSTEM SELECT switch is set to the appropriate position.
Playback cannot be done.
eCheck that the PROGRAMMED
OPERATION
switch is set to the proper position.
eCheck that the TIMER switch is set to the proper position.
eCheck that the SYSTEM
SELECT switch is set to the appropriate position.
The playback picture
Snow or streaks appears.
@ Adjust the TRACKING
control. (See page 22.)
®@Clean the video head. (See page 22.)
The picture has no color.
@Set the COLOR
LOCK switch to either upper or lower position.
@Set the MONITOR TV switch to the COLOR position.
The picture does not maintain
@Set the COLOR
LOCK switch to either upper or lower position.
the correct hue.
Hooking distortion appears.
@ Adjust the SKEW control. (See page 22.)
25
Werbung
