Sony VO-5630 Bedienungsanleitung Seite 19

PROGRAMMED OPERATION
Using the PROGAMMED OPERATION switch, you can
locate a particular point quickly or repeatedly play back a
particular portion.
eFor normal playback, set the PROGRAMMED OPERATION
switch to OFF.
To locate a particular point
1. Play the tape back and press the reset button at the
desired point.
on the PROGRAMMED OPERATION switch to REWIND
At end of the tape, the tape will automatically rewind to
the point where the tape counter reads ''000" and stop.
eto rewind the tape before the tape reaches the end,
press the REW button. The tape will automatically rewind
to the "000" point and stop as illustrated by the blue ar-
row.
3. Press the PLAY button to play the tape back from that
point. 1. Press the reset button.
2. Set the switch to REWIND.
1
Playback
— End of tape
4 Rewinds
14 automatically.
| A
¢ 3. Press PLAY.
To repeat playback between the beginning of the tape and a
particular point
1. Search for the point where playback is to stop and press
the reset button at that point.
2.Set the PROGRAMMED OPERATION switch to REPEAT
ree".
3. Press the REW button to rewind the tape. The tape
rewinds to the beginning of the tape, then the recorder
plays back the designated portion on the tape repeatedly.
1. Press the reset button.
2. Set the switch to REPEAT.
Playback 3. Press REW.
End of tape
Beer =" automatically.
e@When the reset button is pressed at the end of the tape,
the tape rewinds to the beginning of the tape and the
recorder plays back the entire tape repeatedly.
19