General Information - IKEA DCH 300 Bedienungsanleitung

ORIGINAL OPERATING INSTRUCTIONS
DCH 300 diamond cutter
It is essential that the operating instructions
are read before the machine is operated for
the first time.
Always keep these operating instructions to-
gether with the machine.
Ensure that the operating instructions are
with the machine when it is given to other
persons.
Contents

1 General information

2 Description
3 Accessories, consumables
4 Technical data
5 Safety instructions
6 Before use
7 Operation
8 Care and maintenance
9 Troubleshooting
10 Disposal
11 Manufacturer's warranty
12 EC declaration of conformity (original)
1 These numbers refer to the illustrations. You can
find the illustrations at the beginning of the operating
instructions.
In these operating instructions, the designation "the
power tool" always refers to the DCH 300 diamond cutter.
Operating controls and indicators 1
Spindle lockbutton
@
1 General information
1.1 Safety notices and their meaning
DANGER
Draws attention to imminent danger that will lead to
serious bodily injury or fatality.
WARNING
Draws attention to a potentially dangerous situation that
could lead to serious personal injury or fatality.
All manuals and user guides at all-guides.com
;
=
%
&
(
)
+
§
/
:
·
$
Page £
DCH 300 mounting system for diamond cutting
17
18
discs 2
20
21
22
|
25
¡
27
Q
29
DCH 300 mounting system for synthetic resin-bonded
30
30
fiber-reinforced abrasive cutting discs (optional) 3
31
31
W
E
R
T
Hood extension with depth gauge (optional) 4
Z
U
I
O
P
CAUTION
Draws attention to a potentially dangerous situation that
could lead to slight personal injury or damage to the
equipment or other property.
NOTE
Draws attention to an instruction or other useful informa-
tion.
Front grip
On / off switch
Switch-on interlock release button
Diamond cutting disc
Spindle
Guard (hood)
Guide wheels
Clamping nut wrench, 24 mm AF / 10 mm AF
Hex. socket wrench, 6 mm AF
Guard (hood) clamping screw
Dust removal connector cap
Service indicator
Theft protection indicator (option)
Reversible flange 60 mm dia.
Clamping flange, 60 mm dia.
Clamping nut, M16 x 1.5
Reversible flange 80 mm dia.
300 mm dia. synthetic resin-bonded fiber-reinforced
cutting disc
Clamping flange, 80 mm dia.
Clamping nut, M16 x 1.5
Hood extension
Hook
Stop
Cutting depth sliding indicator
Cutting depth scale
en
17