Operation; Charging The Battery; Installing The Hook Attachment; Switching The Product On/Off - VOLTCRAFT BS-27+IP Bedienungsanleitung

10 Operation

10.1 Charging the battery

Note:
The battery must be charged in the following scenarios:
– Before first use
– When the battery indicator (6) shows a low battery status
1. Connect the micro USB port (8) on the product to a suitable USB power source
(max. 5 V/1 A). Use the micro USB cable included with the product.
The battery indicator (6) will flash green.
Æ
2. Wait until charging is complete and the battery indicator (6) is constant green.
3. Disconnect the micro-USB cable from the product and the power supply.

10.2 Installing the hook attachment

Tip:
The optional hook attachment allows you to reach small objects in areas that
are difficult to access.
1. Slide the hook attachment onto the camera head.
2. Ensure that the hook attachment is securely in place and cannot become loose
unintentionally.
The hook attachment is now ready for use.
Æ

10.3 Switching the product on/off

1. Press the on/off button (5).
The product will switch on, and the battery indicator (6) will briefly flash
Æ
green before switching to constant green.
When the battery indicator (6) stops flashing and stays constant green, the
Æ
product is ready to connect.
2. To switch off the product, press the on/off button (5) again.
35