Installing The App And Connecting The Product; Switching Between Cameras; Adjusting The Brightness - VOLTCRAFT BS-27+IP Bedienungsanleitung

10.4 Installing the app and connecting the product

1. Download the Voltcraft BS-26 BS-27 app. The app is available for both iOS and
Android devices.
TM
2. Switch on the product (see section "10.3 Switching the product on/off" on
page 35).
3. Enable Wi-Fi on your mobile device and search for the network "BS-27_IP_
WIFI".
4. Then connect to this network. No password is required.
5. Open the Voltcraft BS-26 BS-27 app.
The product is now connected to the app.
Æ
Important:
– When you are using the app, your mobile device will not be able to access
the Internet via Wi-Fi.
– To avoid interference with image transmission, disable mobile network
access while using the app.

10.5 Switching between cameras

1. To switch between the front and side camera, press the camera selection button
(7).
The selected camera will be activated. The app will display the images from
Æ
the selected camera.

10.6 Adjusting the brightness

1. Press the brightness button (4) to adjust the brightness of the light.
2. If necessary, press the brightness button (4) several times until the desired
brightness level is reached or the light switches off.
Note:
– Alternatively, you can also adjust the brightness by sliding the brightness
controller (14) in the app.
36