THOMSON MIC201IDABBT Bedienungsanleitung Seite 30

Equaliser Function
With your unit switched on (not in Standby mode):
1. Press EQ button to enter the menu options.
2. Use the /
Rock ) according to your individual preferences.
3. Press EQ button twice, use the
4. Press EQ button three times, uss the the
Wireless Charger Function
Simply place your wireless charging device on the wireless charger area indicated on the top surface
and charging will begin on contact.
USB Charging (5V Out)
The USB port is designed for charging external devices, such as smart phones.
AUX Input Jack
1. Press the POWER button to turn on the unit.
2. Press the SOURCE button repeatedly to select the Aux-In mode. 'Aux-In' will appear on the LCD
display.
3. Connect the AUX connect wire from the line out jack of your personal player (e.g. portable MP3
player) to the AUX input jack.
4. Start playback from your personal player.
Phones Jack
1. Rotate the Vloume to set a low volume
2. Inset the headphones to the Phone jack.
Note the following information: Only use the power supplies listed below.
Specification:
Power:
Remote control power source:
Frequency ranges:
Max.consumption:
Speaker impedance:
Total music output:
Remark: The maximum connection distance is around 10 meters. Please place your Bluetooth speaker
as close as possible to this device to avoid connection getting disturbed.
WARNING! Risk of hearing impairment
• Set a low volume on the playback device before connecting the headphones to the
sound source.
• Avoid excessive volume, particularly over extended periods or frequent use. Excessive
volume can result in permanent hearing impairment.
button to scroll to set the Equaliser function (e.g. Normal, Classic, Jazz, Pop,
/
AC230V~ 50Hz 0.3A
2 x AAA battery (Not included)
FM : 88.8 – 108MHz
DAB/DAB+: 174 - 239MHz
Bluetooth: 2402-2480MHz
25W
4 ohms
5W X 2
button to scroll the Bass setting.
/ button to scroll the Treble setting.
- EN 13 -