Technical Data; Maintenance And Cleaning - Eurochron EFW 1000 Bedienungsanleitung

manually PerForming the dcF signal
recePtion attemPt
- To perform a manual search for the DCF signal (e.g., if you have placed the radio
alarm clock in a different location), remove the battery.
- Insert the battery again after about one minute.
- This will start a new reception attempt. Then, as described above, wait for a few
minutes until the correct time is displayed.
alarm Function
a) setting the alarm
m
never rotate the alarm setting knob (2) opposite to the direction indica-
ted by the arrow. this might damage the watch mechanism.
- Rotate the alarm setting knob (2) in the direction indicated by the arrow until the
desired alarm time is displayed by the red hand on the clock face.
b) activating/deactivating the alarm function
-Move the ALARM switch (3) to the desired position:
red field visible: Alarm function is activated
red field not visible: Alarm function is deactivated
c) stopping the alarm signal & snooze function
- At the set alarm time, an alarm signal will sound and the clock face is illuminated
for a few seconds. The alarm signal can be interrupted for 4-5 minutes by press-
ing the snooze button (4). After this, the signal will restart (snooze function).
- This procedure can be repeated up to six times.
- To switch the alarm function off completely, deactivate it with the ALARM button (3).
- If the alarm signal is not exited manually, it will switch off automatically after
about two minutes and will sound again after 12 hours.
illumination
Press the snooze button (4) to turn on the clock face light for a few seconds.
location For use
Select a level, flat and stable location for use.
Protect valuable furniture surfaces by using an appropriate underlay; otherwise, it
may cause scratches.
Set up the radio-controlled alarm clock to prevent it from falling.
To ensure correct DCF reception, the radio-controlled alarm clock should not be
placed next to electronic devices, cables, metal parts, etc.

maintenance and cleaning

The product does not require any maintenance and should never be disassembled
for any reason.
Please use a soft, dry, clean cloth for cleaning.
Do not use any chemical cleaning agents, as they can discolour the plastic casing.
disPosal
a) Product
Electronic devices are recyclable material and must not be disposed of in
the household waste!
Please dispose of the product, when it is no longer of use, according to the
current statutory requirements.
Remove the battery if there is one inserted and dispose of it separately from
the product.
b) batteries and rechargeable batteries
As the end user, you are required by law (Battery Regulation) to return used batter-
ies and rechargeable batteries. Do not dispose of used batteries in the household
waste!
Batteries/rechargeable batteries are labelled with the symbol shown to indi-
cate that disposal with household waste is forbidden. The symbols of the
critical heavy metals are: Cd=cadmium, Hg=mercury, Pb=lead (marking can
be seen on the battery/rechargeable battery, e.g. underneath the refuse bin
symbol shown on the left).
You can return used (rechargeable) batteries free of charge at the official
collection points in your municipality, our stores, or where ever (recharge-
able) batteries are sold!
You thereby fulfil your statutory obligations and contribute to the protection of the
environment.

technical data

Operating voltage ............... 1.5 V/DC
Battery .................................. 1 x 1.5 V Mignon cell (AA)
Battery life ........................... approx. 20 months
Time protocol ...................... DCF 77
Dimensions .......................... 100 x 100 x 100 mm
Weight ................................... 178 g
declaration oF conFormity
We, Conrad Electronic SE, Klaus-Conrad-Straße 1, 92240 Hirschau, hereby declare
that this product adheres to the fundamental requirements and the other relevant
regulations of Directive 1999/5/EC.

You can find the declaration of conformity for this product at
www.conrad.com
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.
com). All rights including translation reserved. Reproduction by any method, e.g. photocopy, mi-
crofilming, or the capture in electronic data processing systems require the prior written approval
by the editor. Reprinting, also in part, is prohibited. This publication represent the technical status
at the time of printing.
© copyright 2015 by conrad electronic se.