Reolink RLC-523WA Bedienungsanleitung Seite 7

Pan&Tilt is not Working
If the pan&tilt is not working , please try the following solutions:
• Power cycle the camera and see if it will automatically pan/tilt. If not,
the camera may be faulty. If yes, please refer to the further steps.
• If the camera fails to pan/tilt via Reolink App/Client on the
WAN(remotely), try it on the LAN(locally) and see if it works.
• Upgrade the Reolink App/Client and the camera firmware to the latest
version.
• Restore the camera to factory settings and check the pan/tilt again.
Specifications
Hardware Features
Night Vision: Up to 60 meters (190ft)
Day/Night Mode: Auto switchover
Angle of View: Horizontal: 96°~27°, vertical: 69°~21°
Pan&Tilt Range: Pan: 360° Tilt: 0°~90°
General
Operating Temperature: -10°C to 55°C (14°F to 131°F)
Operating Humidity: 10%-90%
Weather Resistance: IP66 certified weatherproof
11 English
Size: Φ136 x 201mm
Weight: 1.8kg
Notification of Compliance
FCC Compliance Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
• this device may not cause harmful interference, and
• this device must accept any interference received, including
interference that may cause undesired operation.
NOTE: This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment
generates uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and
English 12