JFP1, JFP2: Front Panel Connectors
These connectors connect to the switches and LEDs on the front panel.
1
SATA1~6: SATA 6Gb/s Connectors
These connectors are SATA 6Gb/s interface ports. Each connector can connect to one
SATA device.
Important
The SATA1 port will be unavailable when an M.2 SATA SSD module has been
y
installed in the M.2 slot.
Please do not fold the SATA cable at a 90-degree angle. Data loss may result during
y
transmission otherwise.
SATA cables have identical plugs on either sides of the cable. However, it is
y
recommended that the flat connector be connected to the motherboard for space
saving purposes.
10
Rear I/O Panel
Downloaded from
2
10
9
JFP1
1
JFP2
ManualsNet.com
1
HDD LED +
3
HDD LED -
5
Reset Switch
7
Reset Switch
9
Reserved
1
Speaker -
3
Buzzer -
SATA4
SATA3
SATA6
SATA5
search engine
2
Power LED +
4
Power LED -
6
Power Switch
8
Power Switch
10
No Pin
HDD LED -
HDD LED
HDD LED +
POWER LED -
POWER LED
POWER LED +
2
Buzzer +
4
Speaker +
SATA1
SATA2