Adjusting Volume And Taste; Adjusting Coffee And Milk Volume; Adjusting Coffee Strength - Philips Saeco INCANTO HD8921/01 Benutzerhandbuch

Adjusting volume and taste

Adjusting coffee and milk volume

Adjusting coffee strength

1
2
3
4
5
You can adjust the volume of the beverage brewed according to your taste
and to the size of the cups.
Caution: Do not use cups that have a diameter of more than 8cm, to avoid
damage to the front panel.
Note: We advise you to use glass cups or cups with a ceramic-coated rim.
1 To adjust the espresso volume, press and hold the ESPRESSO button
until the display shows the MEMO icon.
-
The machine enters the programming phase and starts to brew the
selected beverage.
2 Press the OK button when the cup contains the desired amount of
espresso.
-
The tick on the display shows that the button is programmed: every
time it is pressed, the machine brews the set espresso volume.
Note: To set the volume of espresso lungo, cappuccino and latte macchiato,
follow the same procedure: press and hold the button of the beverage and
press the OK button when the cup contains the desired amount. To adjust
the volume of milk-based coffee beverages, first insert the milk carafe and
save the milk volume and then save the coffee volume.
To change the coffee strength, press the AROMA STRENGTH button. Each
time you press the AROMA STRENGTH button, the aroma strength changes
by one degree. The display shows the chosen strength, which is only saved
if you brew a coffee.
1 Very mild
2 Mild
3 Regular
4 Strong
5 Very strong
Note: The machine automatically dispenses the correct coffee volume for
each coffee strength.
Note: You can also use the AROMA STRENGTH button to brew coffee with
pre-ground coffee.
Note: After adjusting the coffee strength, the display shows the main menu
again and saves the chosen aroma strength when you brew a coffee.
English
13