Button Function - Hohem iTEADY V2 Kurzanleitung

Button Function

① Power (ON/OFF) / Function Button
Long Press： Power On/Off
Single Press： Switch the landscape and portrait modes
Double Press: Recenter the gimbal
Triple Press: Inception (Auto rotation)
Press Five Times: Auto calibration
Press Seven Times: Remote control pairing
The bluetooth light will flash alternatly in yellow and green.
(The remote control is an optional accessory)
a. If the remote control is not paired within 30 seconds, the pairing
will be cancelled;
b. Click the function button to cancel pairing;
c. Double-click the function button to clear the paired remote
control and cancel pairing;
(And the paired remote control will be unavailable and need to be
re-paired)
③ Zoom Slider
(Only available in the app)
Push Up: Zoom in
Push Down: Zoom out
② Joystick
Up/Down： Tilt Control
Left/Right： Pan Control
(It is able to control the roll motor
through Left/Right Joystick Settings
in Hohem Pro app)
④ Shutter Button (Ensure the Bluetooth is connected)
Single Press: Take photo, Start/End video
Double Press: Switch photo/video modes
Triple Press: Switch front/rear cameras (Only available
in the app)
EN 06