Zanussi ZBA3224A Benutzerinformation Seite 49

2
1
Install the appliance in the
niche.
Push the appliance in the
direction of the arrows (1)
until the upper gap cover
stops against the kitchen
furniture. Make sure that
the distance between the
appliance and the cup-
board front-edge is 44
mm.
Push the appliance in the
direction of the arrows (2)
against the cupboard on
the opposite side of the
hinge. Make sure that the
clearance between the
appliance and the cup-
board is 4 mm.
Remove the correct part
from the hinge cover (E).
4mm
44mm
Adjust the appliance in the
niche.
The lower hinge cover (in
the accessories bag)
makes sure that the dis-
tance between the appli-
ance and the kitchen fur-
niture is correct.
Open the door. Put the
lower hinge cover in posi-
tion.
C
D
E
E
Attach the covers (C, D) to
the lugs and the hinge
holes.
Attach the hinge covers
(E) to the hinge.
I
I
Attach the appliance to
the niche with 4 screws.
Ha Hb
Hc
Hd
Disconnect the parts Ha,
Hb, Hc and Hd
Push the sealing strip be-
tween the appliance and
the adjacent cabinet.
ca. 50 mm
90°
21 mm
90°
ca. 50 mm
21 mm
Install the part Ha on the
inner side of the kitchen
furniture.
49