Jslow1: Slow Mode Booting Jumper; Jln1~2: Low Temperature Booting Jumpers - MSI MEG Z790 ACE Benutzerhandbuch

JSLOW1: Slow Mode Booting Jumper

This jumper is used for LN2 cooling solution, that provides the extreme overclocking
conditions, to boot at a stable processor frequency and to prevent the system from
crashing.

JLN1~2: Low Temperature Booting Jumpers

These jumpers allow liquid nitrogen cooling system to boot at an extremely low
temperature. Please try to enable the jumper to help the system boot successfully.
⚠
Important
Please note that overclocking at an extremely low temperature carries the risk of
∙
system instability and may cause damages to the system.
The overclocking results may vary depending on the CPU you use.
∙
Do not enable the jumper when the system is power off. Otherwise, the system will
∙
be unbootable.
Normal
(Default) (Please enable this jumper
during BIOS POST.)
Normal
(Please enable this jumper
(Default)
51
Enabled
Enabled
during BIOS POST.)