Training Timer Function - Stramatel MULTI-TOP Bedienungsanleitung

TRAINING TIMER FUNCTION

Set-up
Plug in the power supply on the side of the Multi-Top.
Use only the power supply supplied by STRAMATEL.
Press the ON/OFF key until the console displays the welcome screen.
Programming
Select the "Training Timer Function" mode with key 14.
The console screen displays the stored configuration during a few seconds: length of each
exercise period, length of each rest period, number of exercise and rest periods to go.
Press key 18 to view the data on the console screen longer.
Change the configuration with key 0 or play with the stored configuration with key 9.
To change configuration: answer the various questions displayed on the console screen with
keys 0 to 9, and enter your answer with key 23.
During programming, it is always possible to come back to the previous programming with key
13.
Timer
Start or stop the timer with key 18. Exercise and rest periods follow each other automatically
on the control console screen.
Horn
The horn can sound automatically or not at the end of a programmed time.
Cancel or select this function by pressing keys 16 and 19 simultaneously ('HORN' displayed on
the console screen = automatic horn - Please note: the text displayed depends on the
language programmed: GB, DK: 'HORN' / NL: 'TOETER' / PT: 'BUZINA' / FI: 'S.').
Sound the horn manually with key 19.
End of the training
Load a similar type of training configuration by pressing key 28.
Load a different type of training configuration: press key 28, then enter in programming mode
with key 27.
ZI de Bel Air 44850 LE CELLIER FRANCE stramatel@stramatel.com Tél. +33 (0)2 40 25 46 90
UA452MTOPS_A - Multi-top on mains.docx Page 35